Huawei OSN 1800 I

Brand: Huawei

Model:OptiX OSN 1800 I

Detail:The OptiX OSN 1800 I include OSN 1800 I AC Power and OSN 1800 I DC Power.

Condition: Brand New Sealed

Availability: IN STOCK

  • Description
  • Specification
  • Ordering information
  • Inquiry

The OptiX OSN 1800 series products include OptiX OSN 1800 V, OptiX OSN 1800 II, and OptiX OSN 1800 I. The OptiX OSN 1800 integrates both OTN and WDM features and uniformly transmits various services at the metro network edge, including broadband, private line, and mobile services. It also supports the unified transmission of multiple services ranging from 2 Mbit/s to 100 Gbit/s, unified switching of OTN/PKT/SDH services, and automatic commissioning at the optical layer. In this way, OptiX OSN 1800 flattens networks, reduces network deployment and O&M costs, and provides optimal solutions for various metro scenarios

OSN 1800 I(AC Power)

OSN 1800 I(AC)

OSN 1800 I(DC Power)

OSN 1800 I(DC)

Ultra-large bandwidth

  • Supports 80 x 100 Gbit/s DWDM capacity at the optical layer, meeting the increasing bandwidth requirements of metro aggregation and access in the FMC 2.0 era.
  • Implements unified switching of VC/PKT/OTN services to greatly improve bandwidth usage.
  • Integrates the MPLS-TP function, so that the OSN 1800 can be used with the OSN 8800 and OSN 9800 to support end-to-end MPLS-TP networking.

Full service scenarios

  • Supports various services, including E1, E3, T3, FE, GE, STM-x, 10GE, 100GE, CPRI, FC, and SAN.
  • Supports various service scenarios, such as fixed broadband, mobile backhaul, and leased line.


Supports the transmission of 2M, IEEE 1588v2, and synchronous Ethernet clocks to fully satisfy the clock precision requirements of 3G, 4G, and future 5G networks.

Flexible installation

  • 1 U and 2 U boxes can be installed in a cabinet, on the wall, or on a pole.
  • 1 U, 2 U, and 5 U boxes can be installed in a 19-inch or 23-inch standard cabinet.

Environmental protection

  • Uses natural heat dissipation and AC/DC power supplies.
  • Achieves flexible deployment at any site based on case-shape design.
  • Reduces power consumption. A typical 1 U chassis consumes less than 25 W, which is less than the power consumption of a table lamp.


TSDN is the core architecture of the next-generation transport network. It features automation, virtualization, flexibility, openness, and synergy. Through TSDN, the OptiX OSN 1800 can realize hardware virtualization at the network access layer, supporting various apps and service innovations.

SpecificationsOptiX OSN 1800 I ChassisOptiX OSN 1800 II Chassis
Dimensions (mm)44 (H) x 442 (W) x 220 (D)88 (H) x 442 (W) x 220 (D)
Number of slots for service boardsDC-powered chassis: 3
AC-powered chassis: 1
DC-powered chassis: 7
AC-powered chassis: 5
ross-connectionOptical1 to 4-degree reconfigurable optical add/drop multiplexer (ROADM)
ElectricalInter-board cross-connections of Any services at a rate lower than 1.25 Gbit/s and 10GE LAN services are supported.
Intra-board cross-connections of Any services at a rate lower than 2.5 Gbit/s are supported, and intra-board cross-connections of VC-4 or VC-12 and ODU0/ODU1/ODUflex/ODU2 services are supported.
WavelengthDWDM: 80 wavelengths
CWDM: 8 wavelengths
Center Wavelength rangeThe system splits wavelength into DWDM band and CWDM band. Systems of different types use different bands.
The OptiX OSN 1800 DWDM system adopts the C band in the fiber communication window. The minimum channel spacing is 0.4 nm. The number of available wavelengths is 80. The operating wavelength range is from 192.10 THz to 196.05 THz (1560.61 nm to 1529.16 nm).
The OptiX OSN 1800 CWDM system adopts the channel spacing of 20 nm. The number of available wavelengths is 8. The operating wavelength range is from 1471 nm to 1611 nm.
Max. rate per channel100 Gbit/s
Service types supportedSDH service, PDH service, OTN service, Ethernet service, CPRI service, OBSAI service, SAN service, SONET service, Video service and others
Line rate2.5 Gbit/s, 10 Gbit/s, 50Gbit/s, 100 Gbit/s
Maximum total of OSN 810 and OSN 850 devices managed by each OSN 1800 NE50
Pluggable optical/electrical moduleOptical module: SFP, XFP, SFP+, QSFP+, TXFP, CFP, CFP2
Electrical module: GE SFP, FE SFP
TopologyPoint to point, Chain, Star, Ring
Redundancy and protectionEquipment level protectionPower Redundancy, Fan Redundancy
Network level protection (OTN)Client 1+1 protection, Intra-Board 1+1 protection, ODUk SNCP, optical line protection, SW SNCP, and LPT
Network level protection (Ethernet)ERPS, LAG, LPT (service-based), MSTP, STP and RSTP, VLAN SNCP
Optical power managementALS, AGC, IF, OPA, IPA
MaintenanceETH OAMEthernet service OAM: supports continuity check (CC), loopback (LB), linktrace (LT), and OAM_Ping.
Ethernet port OAM: supports OAM auto-discovery, link performance monitoring, remote loopback, and self-loop detection.
LoopbackSupports loopback that used to determine whether the board where the loopback is performed is faulty.
PRBSSupports PRBS that used to analyze whether service paths are faulty.
SynchronizationSynchronous Ethernet clock
IEEE 1588v2
ITU-T G.8275.1/G.8273.2
SDH clock
Standard working voltage -48 V/-60 V DC power input
110 V/220 V DC power input
Installation mode19-inch cabinet or 19-inch open rack
ETSI 300-mm cabinet
F01S300 cabinet (only when working with F3SCC)
Running environmentChassis relative humidityLong-term running: 5% to 85%
Short-term running: 5% to 95%
ETSI conformityETSI Class 3.1
MTTR4 hours
MTBF61.44 years

Model:OSN 1800 I

Detail:The OptiX OSN 1800 I include OSN 1800 I AC Power and OSN 1800 I DC Power.

Condition: Brand New Sealed

Availability: IN STOCK

Contact Us