Huawei OptiX OSN 9800 TNU2UXCS Board

~~$5,600.00~~ $3,600.00

Brand: Huawei

Model: TNU2UXCS

Detail: Huawei Core OTN-TNU2UXCS- cross-connect board-1*1

Condition: 100% New

Availability: IN STOCK

Description
Features
Ordering information
Inquiry

OptiX OSN 9800 TNU2UXCS Board

UXCS board is a cross-connect board. The M:N mode is used to configure UXCS boards. M represents the number of protection UXCS boards, and N represents the number of working UXCS boards.

UXCS

UXCS: Enhanced Universal Cross Connect Board

Version Description
The UXCS board has two functional version:TNU2, TNS1 .
Update Description
This section describes the hardware updates in V100R002C10&V100R002C00SPC810 and later versions as well as the reasons for the updates. Any product versions that are not listed in the document means that they have no hardware updates.
Application
UXCS board is a cross-connect board. The M:N mode is used to configure UXCS boards. M represents the number of protection UXCS boards, and N represents the number of working UXCS boards. The working and protection UXCS boards are used to cross-connect and protect ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) signals, Ethernet packets and VC-4 signals inside a subrack.
Functions and Features
The UXCS board performs centralized cross-connections of electrical signals.
Front Panel
There are four indicators on the front panel of the UXCS board.
Valid Slots
The UXCS board is a single-width board (requiring one slot).
UXCS Specifications
Specifications include dimensions, weight, and power consumption.

Version Description

The UXCS board has two functional version:TNU2, TNS1 .

Mapping Between the Board and OptiX OSN 9800 U64/U32/U16

The following provides the board(s) supported by the OptiX OSN 9800 U64/U32/U16. However, the availability of the board(s) is subject to PCNs. For PCN information, contact the product manager at your local Huawei office.

Board	Initial Version	9800 U64 StandardSubrack	9800 U32 StandardSubrack	9800 U16 Subrack
TNU2UXCS	V100R002C10&V100R002C00SPC810	Y	Y	N
TNS1UXCS	V100R002C10&V100R002C00SPC810	N	N	Y

NOTE:

The logical board of the XCS and UXCS cannot be used in the same subrack.

Variant

The TNU2UXCS board has only one variant: TNU2UXCS01.

The TNS1UXCS board has only one variant: TNS1UXCS01.

Differences Between Versions

Appearance:The UXCS panel appearance varies according to the version. For details
Specifications:
The UXCS specifications vary according to the version. For details, see UXCS Specifications.

Substitution Relationship

Original Board	Substitute Board	Substitution Rules
TNU2UXCS	None	-
TNV2XCS	TNU2UXCS	The TNU2UXCS can be created as V2XCS on the NMS. The former can substitute for the latter, without any software upgrade. After substitution, the TNU2UXCS functions as the TNV2XCS.
TNS1XCS	TNS1UXCS	The TNS1UXCS can be created as S1XCS on the NMS. The former can substitute for the latter, without any software upgrade. After substitution, the TNS1UXCS functions as the TNS1XCS.
TNS1UXCS	None	-

Update Description

This section describes the hardware updates in V100R002C10&V100R002C00SPC810 and later versions as well as the reasons for the updates. Any product versions that are not listed in the document means that they have no hardware updates.

Hardware Updates in V100R002C10&V100R002C00SPC810

Hardware Update	Reason for the Update
Added the TNU2UXCS and TNS1UXCS board.	The TNU2UXCS and TNS1UXCS board must be used to cross-connect and protect ODUk (k = 0, 1, 2, 2e, 3, 4, flex) signals ,packet services and VC-4 signals in a subrack.

Application

UXCS board is a cross-connect board. The M:N mode is used to configure UXCS boards. M represents the number of protection UXCS boards, and N represents the number of working UXCS boards. The working and protection UXCS boards are used to cross-connect and protect ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) signals, Ethernet packets and VC-4 signals inside a subrack.

the position of the UXCS board in a WDM system.

Figure 8-153 Position of the UXCS board in a WDM system

Functions and Features

The UXCS board performs centralized cross-connections of electrical signals.

describes the functions and features of the UXCS board.

Table 8-189 Functions and features of the UXCS board

Function and Feature	Description
Basic function	Performs centralized cross-connections of ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) signals, Ethernet packets and VC-4 signalsinside the subrack.
Configuration and cross-connect capacity	OptiX OSN 9800 U64 Standard subrack (Only supported by the TNU2UXCS board ) Cross-connects a maximum of 25.6 Tbit/s ODUk (k = 0, 1, 2, 2e, 3, 4 or flex) signals. Performs packet switching of a maximum of 12.8 Tbit/s Ethernet services. Cross-connects a maximum of 5.12 Tbit/s VC-4 signals. Each service slot provides a cross-connect capacity of 400 Gbit/s. OptiX OSN 9800 U32 Standard subrack (Only supported by the TNU2UXCS board ) Cross-connects a maximum of 12.8 Tbit/s ODUk (k = 0, 1, 2, 2e, 3, 4 or flex) signals. Performs packet switching of a maximum of 6.4 Tbit/s Ethernet services. Cross-connects a maximum of 2.56 Tbit/s VC-4 signals. Each service slot provides a cross-connect capacity of 400 Gbit/s. OptiX OSN 9800 U16 subrack (Only supported by the TNS1UXCS board ) Cross-connects a maximum of 5.6 Tbit/s ODUk (k = 0, 1, 2, 2e, 3, 4 or flex) signals. Performs packet switching of a maximum of 2.8 Tbit/s Ethernet services. Cross-connects a maximum of 1.12 Tbit/s VC-4 signals. Each service slot provides a cross-connect capacity of 400 Gbit/s.
Backup mode	The M:N mode is used to configure UXCS boards. M represents the number of protection UXCS boards, and N represents the number of working UXCS boards. For the OptiX OSN 9800 U64 Standard: M + N = 14, M ≤ 2. For the OptiX OSN 9800 U32 Standard/U16: M + N = 7, M ≤ 2. When two UXCS boards are faulty, the system can still function properly. If more than two UXCS boards become faulty, however, the system will fail.
Switching mode	Auto switching, manual switching, and forced switching are supported. Revertive switching is supported. An UXCS board can be locked in a working or protection state.
Electrical-layer ASON	Supported

Front Panel

There are four indicators on the front panel of the UXCS board.

Appearance of the Front Panel

shows the front panel of the TNU2UXCS board.

Figure 8-154 Front panel of the TNU2UXCS board

shows the front panel of the TNS1UXCS board.

Figure 8-155 Front panel of the TNS1UXCS board

Indicators

Four indicators are present on the front panel:

Board hardware status indicator (STAT) - triple-colored (red, green, yellow)
Service active status indicator (ACT) - dual-colored (red, green)
Board software status indicator (PROG) - dual-colored (red, green)
Service alarm indicator (SRV) - triple-colored (red, green, yellow)

For details about these indicators, see Board Indicators.

Interfaces

The UXCS board has no external interfaces.

Valid Slots

The UXCS board is a single-width board (requiring one slot).

lists the valid slots for the TNU2UXCS board.

Table 8-190 Valid slots for the TNU2UXCS board

Product	Valid Slots
OptiX OSN 9800 U32 Standardsubrack	IU71-IU77
OptiX OSN 9800 U64 Standardsubrack	IU71-IU77, IU79-IU85

lists the valid slots for the TNS1UXCS board.

Table 8-191 Valid slots for TNS1UXCS board

Product	Valid Slots
OptiX OSN 9800 U16 subrack	IU71-IU77

UXCS Specifications

Specifications include dimensions, weight, and power consumption.

Mechanical Specifications

Dimensions of the front panel:TNU2UXCS: Dimensions of the front panel (H x W x D): 477.3 mm (18.8 in.) x 30.5 mm (1.2 in.) x 220.0 mm (8.7 in.)
TNS1UXCS: Dimensions of the front panel (H x W x D): 183 mm (7.2 in.) x 30.5 mm (1.2 in.) x 220.0 mm (8.7 in.)
Weight:TNU2UXCS: 3.06 kg (6.83 lb.)
TNS1UXCS: 2 kg (4.46 lb.)

Power Consumption

Board	Typical Power Consumption (W)	Maximum Power Consumption^a (W)
TNU2UXCS	155	165
TNS1UXCS	68	72
a:The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature.