CE6810-EI-B00

$4,808.00

Brand: Huawei

Model: CE6810-EI-B00

Detail: CE6810-EI-B00 Huawei CE6800 Series Data Center Switch CE6810-48S4Q-EI Switch(2*600W AC Power Module,2*FAN Box,Port side exhaust)

Condition: Brand New Sealed

Availability: IN STOCK

Description
Specification
Ordering information
Inquiry

CE6810-EI-B00 Overview

CE6810-EI-B00 is CE6810-48S4Q-EI Switch(2*600W AC Power Module,2*FAN Box,Port side exhaust).

Quick Specs

Figure 1 shows the appearance of CE6810-EI-B00.

Table 1 shows the Quick Specs.

Product Code	CE6810-EI-B00
Part Number	02359247
Software Version	V100R003C00 and later
Fixed GE interfaces	None
Fixed 10GE interfaces	48*10GE SFP+
Fixed 40GE interfaces	4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces.
Fixed 100GE interfaces	None
Switching Capacity	1.28 Tbit/s
Forwarding Rate	960 Mpps
Rated voltage range(with power module)	100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC
Maximum power consumption	238W
Fan type	Pluggable fan module
Airflow Design	Front-to-back or back-to-front
Dimensions (W x D x H)	442 mm x 600 mm x 43.6 mm
Weight (fully loaded)	10.4 kg (22.9 lb)

Product Details

Figure 2 shows the rear (port side) panel of CE6810-EI-B00.

CE6810-EI-B00_Rear_port_side

Note:

①	Forty-eight 10GE SFP+ Ethernet optical ports
②	Four 40GE QSFP+ Ethernet optical ports

Figure 3 shows the front (power supply side) panel of CE6810-EI-B00.

CE6810-EI-B00_Front_power_supply_side

Note:

①	Power supply slot 1
②	Fan slot 1
③	Console port
④	Bar code label
⑤	Fan slot 2
⑥	Power supply slot 2
⑦	USB port
⑧	ETH management port

The Modules

Table 2 shows the recommended elements for the CE6810-EI-B00.

Model	Description
AC power module
PAC-600WA-F	600W AC Power Module(Front to Back,Power panel side intake)
PAC-600WA-B	600W AC Power Module(Back to Front,Power panel side exhaust)
	GE-SFP Optical Transceiver
eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)
SFP-GE-LX-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)
S-SFP-GE-LH40-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)
S-SFP-GE-LH40-SM1550	Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)
10G-SFP+ Optical Transceiver
SFP-10G-USR	10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)
OMXD30000	Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)
40GE QSFP+ optical transceiver
QSFP-40G-iSR4	40GBase-iSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.15km,MPO)(Connect to four SFP+ Optical Transceiver)
QSFP-40G-LR4	40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC)
GE Copper Transceiver
SFP-1000BaseT	Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)
FAN-40EA
FAN-40EA-F	Fan box(EA,Front to Back,FAN panel side intake)
FAN-40EA-B	Fan box(EA,Back to Front,FAN panel side exhaust)

Compare to Similar Items

Table 3 shows the comparison of CE6810-EI-B00, CE6810-LI-F-B0C and CE6810-32T16S4Q-LI-B.

Product Code	CE6810-48S4Q-EI	CE6810-LI-F-B0C	CE6810-32T16S4Q-LI-B
Software Version	V100R003C00 and later	V100R005C10 and later	V100R005C10 and later
Fixed 10GE interfaces	48*10GE SFP+	24*10GE SFP+	3210GBASE-T 1610GE SFP+
Fixed 40GE interfaces	4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces.	2*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces.	4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces
Fixed 100GE interfaces	None	None	None
Switching Capacity	1.28 Tbit/s	640 Gbit/s	1.28 Tbit/s
Forwarding Rate	960 Mpps	480 Mpps	960 Mpps
Maximum power consumption	238W	171W	288W

Specifications

tem	CE6810LI
	CE6810-48S4Q-LI	CE6810-32T16S4Q-LI	CE6810-24S2Q-LI
10G Base-T Ports	0	32	0
SFP+ Ports	48	16	24
QSFP+ Ports	4	4	2
Switching Capacity	1.28 Tbit/s	1.28 Tbit/s	640 Gbit/s
Forwarding Rate	960 Mpps	960 Mpps	480 Mpps
Airflow Design	Front-to-back or back-to-front
Device Virtualization	iStack: For details about the configuration, please see: http://support.huawei.com/onlinetoolsweb/virtual/en/dc/stack_index.html?dcb Super Virtual Fabric (SVF): For details about the configuration, please see: http://support.huawei.com/onlinetoolsweb/virtual/en/dc/svf_index.html?dcb M-LAG
Traffic Analysis	NetStream
	sFlow
VLAN	Adding access, trunk, and hybrid interfaces to VLANs Default VLAN QinQ MUX VLAN GVRP
ACL	Ingress: 1,250	Ingress: 1,250	Ingress: 1,250
	Egress: 500	Egress: 500	Egress: 500
MAC Address Table	Maximum: 128k	Maximum: 128k	Maximum: 128k
	Dynamic learning and aging of MAC addresses Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses MAC address limiting based on ports and VLANs
ARP (maximum)	1.5k	1.5k	1.5k
IPv4 FIB (maximum)	1.5k	1.5k	1.5k
IP Routing	IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
Multicast	IGMP snooping MLD snooping
Reliability	LACP STP, RSTP, VBST, MSTP BPDU protection, root protection, and loop protection Smart Link and multi-instance DLDP, LLDP ERPS (G.8032) VRRP, VRRP load balancing, and BFD for VRRP
QoS	Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Actions of ACL, CAR, re-marking, and scheduling Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR Congestion avoidance mechanisms, including WRED and tail drop Traffic shaping
Configuration and Maintenance	Console, Telnet, and SSH terminals Network management protocols, such as SNMP v1/v2c/v3 File upload and download through FTP and TFTP BootROM upgrade and remote upgrade 802.3az Energy Efficient Ethernet (EEE) Hot patches User operation logs ZTP
Security and Management	802.1x authentication Command line authority control based on user levels, preventing unauthorized users from using commands DoS, ARP, and ICMP attack defenses Port isolation, port security, and sticky MAC Binding of the IP address, MAC address, interface number, and VLAN ID Authentication methods, including AAA, RADIUS, and HWTACACS Remote Network Monitoring (RMON)
Dimensions (W x D x H)	442 mm x 600 mm x 43.6 mm	442 mm x 420 mm x 43.6 mm	442 mm x 600 mm x 43.6 mm
Weight (fully loaded)	10.4 kg (22.9 lb)	8.5 kg (18.7 lb)	10.1 kg (22.3 lb)
Environmental Parameters	Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) Storage temperature: -40°C to 70°C (-40°F to 158°F) Relative humidity: 5% RH to 95% RH, non-condensing
Operating Voltage	AC: 90V to 290V DC: -38.4V to -72V
Max. Power Consumption	238W	288W	171W