CE5850-HI-B00

$4,380.00

Brand: Huawei

Model: CE5850-HI-B00

Detail: CE5850-HI-B00 Huawei CE5800 Series Data Center Switch CE5850-48T4S2Q-HI (2*150W AC Power Module,2*FAN Box,Port side exhaust)

Condition: Brand New Sealed

Availability: IN STOCK

Category: Huawei Switch Tags: Huawei Switch, CE5850-HI-B00, CE5850-48T4S2Q-HI, Huawei CE5800, CE5800 Switch, Huawei CE5850-48T4S2Q-HI, CE5850-48T4S2Q-HI Switch, Huawei CE5850-HI-B00, Data Center Switch

Description
Specification
Ordering information
Inquiry

CE5850-HI-B00 Overview

CE5850-HI-B00 is CE5850-48T4S2Q-HI Switch (2*150W AC Power Module,2*FAN Box,Port side exhaust). The Huawei CloudEngine CE5800 series switches are next-generation, high-density Gigabit Ethernet switches designed for data centers and high-end campus networks. The hardware has an advanced architectural design with the industry’s highest density of GE access ports. The CE5800 is also the first Gigabit Ethernet access switch to provide 40 GE uplink ports.

Quick Specs

Figure 1 shows the appearance of CE5850-HI-B00.

CE5850-48T4S2Q-HI_1

Table 1 shows the Quick Specs.

Product Code	CE5850-HI-B00
Part Number	02359246
Software Version	V100R003C00 and later
Base-T Ports	48
SFP+ Ports	4
QSFP+ Ports	2
Switching Capacity	336 Gbit/s
Forwarding Rate	252 Mpps
Power module type	2*150W AC Power Module
Fan	2*FAN Box
Rated voltage range	100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC
Maximum power consumption	131W
Airflow	Front-to-back or back-to-front
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Weight (fully loaded)	8.8 kg (19.4 lb)
Typic Power(W)	109

Product Details

Figure 2 shows the CE5850-HI-B00 rear view (port side).

CE5850-HI-B00_Rear View Port Side

Note:

①	Forty-eight 10/100/1000BASE-T Ethernet electrical ports
②	Four 10GE SFP+ Ethernet optical ports
③	Two 40GE QSFP+ Ethernet optical ports

Figure 3 shows the CE5850-HI-B00 front view (power supply side).

CE5850-HI-B00_Front View Power Supply Side

Note:

①	Power supply slot 1
②	Fan slot 1
③	Console port
④	ETH management port
⑤	Bar code label
⑥	USB port
⑦	Fan slot 2
⑧	Power supply slot 2

The Modules

Table 2 shows the recommended elements for the CE5850-HI-B00.

Model	Description
GE-SFP Optical Transceiver
eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)
SFP-GE-LX-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)
S-SFP-GE-LH40-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)
S-SFP-GE-LH40-SM1550	Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)
10G-SFP+ Optical Transceiver
SFP-10G-USR	10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC)
OMXD30000	Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC)
OSX010000	Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC)
GE Copper Transceiver
SFP-1000BaseT	Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)
FAN-40EA
FAN-40EA-F	FAN-40EA-F fan module (front-to-back, air intake on panel)
FAN-40EA-B	FAN-40EA-B fan module (back-to-front, air exhaust on panel)

Compare to Similar Items

Table 3 shows the comparison of CE5850-HI-B00, CE5855-24T4S2Q-EI-B and CE5855-48T4S2Q-EI-F.

Product Code	CE5850-HI-B00	CE5855-24T4S2Q-EI-B	CE5855-48T4S2Q-EI-F
Software Version	V100R003C00 and later	V100R005C10 and later	V100R005C10 and later
Base-T Ports	48	24	48
SFP+ Ports	4	4	4
QSFP+ Ports	2	2	2
Switching Capacity	336 Gbit/s	288 Gbit/s	336 Gbit/s
Forwarding Rate	252 Mpps	215 Mpps	252 Mpps
Maximum power consumption	131W	75W	103W

Specifications

Item	CE5855-48T4S2Q-EI	CE5855-24T4S2Q-EI	CE5850-48T4S2Q-HI	CE5810-48T4S-EI	CE5810-24T4S-EI
Base-T Ports	48	24	48	48	24
SFP+ Ports	4	4	4	4	4
QSFP+ Ports	2	2	2	-	-
Switching Capacity	336 Gbit/s	288 Gbit/s	336 Gbit/s	176 Gbit/s	128 Gbit/s
Forwarding Rates	252 Mpps	215 Mpps	252 Mpps	132 Mpps	96 Mpps
Airflow Design	Front-to-back or back-to-front
Device Virtualization	iStack For details about the configuration, please see: http://support.huawei.com/onlinetoolsweb/virtual/en/dc/stack_index.html?dcb Super Virtual Fabric (SVF) For details about the configuration, please see: http://support.huawei.com/onlinetoolsweb/virtual/en/dc/svf_index.html?dcb
Network Virtualization	M-LAG TRILL (CE5855 & CE5850)
Programmability	Open Programmability System (OPS)
Traffic Analysis	NetStream sFlow
VLAN	Adding access, trunk, and hybrid interfaces to VLANs Default VLAN QinQ MUX VLAN GVRP
ACL	ingress: 9k egress: 2k	ingress: 4.5k egress: 1k	ingress: 2.25k egress: 1k	ingress: 4.5k egress: 1k	ingress: 2.25k egress: 512
MAC Address Table	maximum: 64k	maximum: 64k	maximum: 128k	maximum: 32k	maximum: 32k
	Dynamic learning and aging of MAC addresses Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses MAC address limiting based on ports and VLANs
ARP (maximum)	54k	54k	16k	8k	8k
ND (Maximum)	16k	16k	4k	4k	4k
IPv4 FIB (maximum)	32k	32k	16k	12k	12k
IP Routing	IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
IPv6 FIB (maximum)	16k	16k	8k	6k	6k
IPv6	IPv6 Neighbor Discovery (ND) Path MTU Discovery (PMTU) TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6
Multicast FIB (maximum)	2k	2k	4k	8k	8k
Multicast	IGMP, PIM-SM, PIM-DM, MSDP, and MBGP IGMP snooping Fast leave of multicast member interfaces Multicast traffic suppression Multicast VLAN
Reliability	LACP STP, RSTP, VBST, MSTP BPDU protection, root protection, and loop protection Smart Link and multi-instance DLDP ERPS (G.8032) VRRP, VRRP load balancing, and BFD for VRRP BFD for BGP/IS-IS/OSPF/Static route
QoS	Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Actions of ACL, CAR, re-marking, and scheduling Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR Congestion avoidance mechanisms, including WRED and tail drop Traffic shaping
Configuration and Maintenance	Console, Telnet, and SSH terminals Network management protocols, such as SNMP v1/v2c/v3 File upload and download through FTP and TFTP BootROM upgrade and remote upgrade 802.3az Energy Efficient Ethernet (EEE) Hot patches User operation logs Zero-Touch Provisioning (ZTP)
Security and Management	802.1x authentication Command line authority control based on user levels, preventing unauthorized users from using commands DoS, ARP, and ICMP attack defenses Port isolation, port security, and sticky MAC Binding of the IP address, MAC address, interface number, and VLAN ID Authentication methods, including AAA, RADIUS, and HWTACACS Remote Network Monitoring (RMON)
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Weight (fully loaded)	8.4 kg (18.5 lb)	8.1 kg (17.8 lb)	8.8 kg (19.4 lb)	8.2 kg (18.1 lb)	8 kg (17.6 lb)
Environmental Parameters	Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) Storage temperature: -40°C to 70°C (-40°F to 158°F) Relative humidity: 5% to 95%, non-condensing
Operating Voltage	AC: 90V to 264V		AC: 90V to 290V
	DC: -38.4V to -72V
Maximum Power Consumption	103W	75W	131W	92W	68W