Huawei OLT MA5800 H901EPHF Board

~~$1,160.00~~ $680.00

Brand: Huawei

Model: H901EPHF

Detail: Huawei 16-port EPON interface board

Condition: 100% New

Availability: IN STOCK

Description
Features
Ordering information
Inquiry

H901EPHF Board Description

The H901EPHF board is a 16-port EPON interface board. It works together with the optical network unit (ONU) to provide EPON access services.

Appearance

MA5800 series OLT：MA5800-X17 MA5800-X15 MA5800-X7 MA5800-X2

Functional Specifications

GPON Interface Boards Comparison

In the table, "Yes" indicates "supported" and "No" indicates "not supported".

Specification	H901GPHF	H901GPSF

**Table 1** Differences between GPON Interface boards
Specification	H901GPHF	H901GPSF
Application scenario	FTTC/B/D, D-CCAP,FTTH,FTTO/FTTM	FTTH
Port quantity	16	16
Forwarding capability	40 Gbit/s	40 Gbit/s
Port Rate	upstream: 1.244 Gbit/s downstream: 2.488 Gbit/s	upstream: 1.244 Gbit/s downstream: 2.488 Gbit/s
Maximum split ratio	1: 128	1: 128
ONU-based shaping	Yes	Yes
Controlled optical signal transmission of the optical module	Yes	Yes
Temperature query and high temperature alarm	Yes	Yes
Automatic power shutdown in case of a high temperature	Yes	Yes
Energy saving for service boards	Yes	Yes
Maximum distance difference between two ONUs under the same PON port	40 km	40 km
Maximum number of MAC addresses	131072	16384
Board supporting downstream FEC	Yes	Yes
Board supporting upstream FEC	Yes	Yes
Rogue ONT detection and isolation	Yes	Yes
Assured bandwidth configurable on a port	1238784 kbit/s	1238784 kbit/s
Number of T-CONT supported by each GPON port	1024	1024
Number of ONUs supported by a GPON port	128	128
Number of GEM ports supported by each board	16384	16384
Number of GEM ports supported by each GPON port	3872	3872
Maximum Number of Service Flows Supported by the Board	16368	16368
9216-byte Jumbo frames	Yes	No
Routes/ARP	196608	65536
1588v2	Yes	No
NTP	Yes	Yes
HQoS	Yes	No
Security (Anti-DOS, Anti-MAC/IP Spoofing)	Yes	Yes
Y.1731 PM	Yes	No
PON ISSU	Yes	Yes
D-CCAP	Yes	No
GPON Type B Protection Principles (Single Homing)	Yes	Yes
GPON Type B Protection Principles (Dual Homing)	Yes	No
GPON Type C Protection Principles (Single Homing)	Yes	Yes
GPON Type C Protection Principles (Dual Homing)	Yes	No
Power budget supported by a GPON port	Class B+ (28.5 dB, mostly used), Class C+ (32 dB, long reach transmission) Class C++: 35 dB
Minimum bandwidth supported by a T-CONT	1 Mbit/s (in the minimum delay mode) 128 kbit/s (in the maximum bandwidth usage mode)

Technical Specifications

Board Specifications

You can query power consumption, weight, maximum frame size, and normal operating temperature of all boards.

lists the power consumption, weight, and maximum frame size of boards.

The operating temperature of H901TWED is -40°C to +55°C (in MA5800–X17/X15/X7) or -40°C to +65°C (in MA5800–X2) and the lowest board startup temperature is -25°C. The operating temperature of other boards is -40°C to +65°C and the lowest board startup temperature is -25°C.

NOTE:

The power consumption of a board is calculated based on the following conditions:
- Operating voltage: -53.5 V DC.
- Ambient temperature: 25°C.
- Static power consumption: All ports do not carry any loads and optical modules are not installed on optical ports.
- Maximum power consumption: All ports fully carry loads.
The board power consumption slightly varies with the power module configured for the board and discreteness of components.
In the case of Access device, power consumption is generally transformed into heat consumption. Hence, heat consumption (BTU/h) and power consumption (W) can be converted to each other in the formula: 1 BTU/h = 0.2931 W.

Board	Power Consumption	Weight	Maximum Frame Size

**Table 1** Power consumption and maximum frame size of boards
Board	Power Consumption	Weight	Maximum Frame Size
Control board
H901MPLA	Static: 62 W Maximum: 89 W	2.20 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H902MPLA	Static: 53 W Maximum: 87 W	1.24 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901MPLB	Static: 62 W Maximum: 117 W	1.24 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901MPSC	Static: 53W Maximum: 67 W	0.99 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
Daughter board of Control board
H901CKUA	Static: 2 W Maximum: 2 W	0.03 kg	N/A
H901CKUB	Static: 2 W Maximum: 2 W	0.03 kg	N/A
Upstream interface board
H901NXED	Static: 40 W Maximum: 53 W	0.99 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
Universal interface board
H901CIUA	Static: 6 W Maximum: 7 W	0.37 kg	N/A
Power interface board
H901PILA	Static: 0.5 W Maximum: 4 W	0.43 kg	N/A
H901PISA	Static: 2.5 W Maximum: 2.5 W	0.72 kg	N/A
H901PISB	Static: 5 W Maximum transfer efficiency: 93% (220 V, 100% load, 25°C)	1.12 kg	N/A
GPON interface board
H901GPHF	Static: 25 W Maximum: 50 W	0.94 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901GPSF	Static: 25 W Maximum: 50 W	0.94 kg	2052 bytes.
XG-PON interface board
H901XGHD	Static: 42 W Maximum: 61 W	1.07 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901XGSF	Static: 42 W Maximum: 83 W	1.08 kg	2052 bytes.
XGS-PON interface board
H901TWED	Static: 108 W Maximum: 151 W	1.16 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901XSHF	Static: 48 W Maximum: 94 W	1.21 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
PON Combo interface board
H901CGID	Static: 42 W Maximum: 78 W	1.98 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901CGHF	Static: 48 W Maximum: 106 W	1.21 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901CSHF	Static: 48 W Maximum: 98 W	1.21 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
Flex-PON interface board
H901FLHF	Static: 48 W Maximum: 106 W	1.21 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
TDM service Processing board
H901EDSH	Static: 26 W Maximum: 28 W	0.93 kg	N/A
GE/FE optical interface board
H901OGHK	Static: 42 W Maximum: 75 W	1.09 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
10GE/GE optical interface board
H901OXHD	Static: 37 W Maximum: 50 W	0.99 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
H901OXEG	Static: 88 W Maximum: 144 W	1.42 kg	2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.
Video service processing board
H901CVEC	Static: 54 W Maximum: 56 W	1.03 kg	N/A
FAN monitoring board
H901FMLA (for fan tray of MA5800-X17)	Fan tray: Static: 20 W Maximum: 139 W	4.40 kg (Fan tray)	N/A
H901FMLA (for fan tray of MA5800-X15)	Fan tray: Static: 14 W Maximum: 225 W	4.90 kg (Fan tray)	N/A
H901FMMA (for fan tray of MA5800-X7)	Fan tray: Static: 14 W Maximum: 189 W	2.00 kg (Fan tray)	N/A
H901FMSA (for fan tray of MA5800-X2)	Fan tray: Static: 6 W Maximum: 63 W	0.70 kg (Fan tray)	N/A

Working Principle

Figure 2 Working principle of the H901GPHF board

	Indicates the channel of control signal.		Indicates the channel of service signal.
	Control module: loads the board software, controls the running of the board, and manages the board.		Switching module: aggregates and forwards the signals from 16 GPON ports. Interface module: conversion between GPON optical signals and Ethernet packets.
	Indicates the channel of power or clock signal.		The power module supplies power to each functional module of the board. The clock module provides clock signals for each functional module of the board.

Front Panel Port

click to enlarge

Indicator

Indicator	Name	Color	Status	Operation Description
RUN/ALM	Running status indicator	Red	Blinking	The board enters the APP start phase during the board startup
		Green	Blinking quickly (on for 0.25 s and off for 0.25 s repeatedly)	The board enters the phase of communication with the control board during its startup
		Green	Blinking slowly (on for 1 s and off for 1 s repeatedly)	The board works in the normal state
		Orange	Blinking (on for 0.25 s and off for 0.25 s repeatedly)	A high-temperature alarm is generated
		Red	On	The board is faulty
PON 0-15	PON port indicator	Green	On	The ONT of the related PON port is online
PON 0-15	PON port indicator	-	Off	The ONT of the related PON port is offline

Model: H901EPHF

Detail: Huawei 16-port EPON interface board

Availability: IN STOCK

Huawei OLT MA5800 H901EPHF Board