ФусионСервер РХ8100 В3 | Хонгтелецом

Хуавеи ФусионСервер РХ8100 В3

Марка: Хуавеи

Модел: ФусионСервер РХ8100 В3

Детаљ: Хуавеи ФусионСервер РХ8100 В3 Рацк сервер，4 или 8 Процесори серије Интел Ксеон Е7-8800 в2 / в3, 192 Подржава ДДР4 ДИММ-ове, РАИД, 8 модули вентилатора који се могу заменити врућим поступком, 4 заменљива напајања која се могу топло заменити

Стање: Потпуно ново запечаћено

Доступност: НА ЛАГЕРУ

Категорија: Хуавеи Сервер Ознаке: ХонгТелецом, RH8100 V3 Server, RH8100 V3 Rack Server, ФусионСервер РХ8100 В3, huawei RH8100 V3 price, RH8100 V3 Server price, RH8100 V3 Rack Server price, FusionServer RH8100 V3 price

Опис
Спецификација
Информације за наручивање
Упит

The RH8100 V3 provides three front I/O modules:

The front I/O module of model A (FM-A) provides performance-balanced configuration.The FM-A supports a maximum of 12 САС ХДД, САТА ХДД, или ССД дискови, two RAID controller cards, and six standard PCIe slots on PCIe riser cards. The PCIe slots do not support standard cards that need to connect to external cables, such as, NICs, HBAs, IBs. You can install PCIe SSDs and GPUs in the slots.
The front I/O module of model B (FM-B) provides storage-enhanced configuration.The FM-B supports a maximum of 24 САС ХДД, САТА ХДД, or SSDs and two RAID controller cards. It does not support standard PCIe slots.
The front I/O module of model C (FM-C) provides low-level configuration.The FM-C supports a maximum of eight SAS HDDs, САТА ХДД, or SSDs and two RAID controller cards. It does not support standard PCIe slots.
The front I/O module of model D (FM-D) supports NVMe PCIe SSDs.The FM-D supports a maximum of eight SAS HDDs, САТА ХДД, ССД, or NVMe PCIe SSDs and two RAID controller cards, but does not support standard PCIe slots. NVMe PCIe SSDs do not support RAID. If NVMe PCIe SSDs are installed in all disk slots, no RAID controller cards need to be configured on the server.

RH8100-V3

Предмет	RH8100 V3 Specifications
Модул вентилатора	Расипајте топлоту са сервера, подржава хот свап, и дозвољавају кварове са једним вентилатором. Ако један вентилатор поквари, брзина осталих вентилатора се подешава по површини како би се обезбедило расипање топлоте.
ПСУ	Four DC or AC PSUs in 2+2 редундантни режим: АЦ ПСУ: converts AC power into 12 V DC power for the RH8100 V3. ДЦ ПСУ: converts input DC power into 12 V DC power for the RH8100 V3.
HFC	Consists of a TPM, НИЦ, LAN on motherboard (ЛОМ), and USB flash drive. An HFC provides the following ports: УСБ порт Management network port Серијски порт ВГА порт Each HFC has a BCM5720 LOM, which is used as a service NIC. Each LOM has ports 0 и 1. When two LOMs communicate with each other, Лука 0 on one LOM can communicate with only port 0 on the other LOM, and port 1 on one LOM can communicate with only port 1 on the other LOM. If the RH8100 V3 operates in dual-system mode, one service system can obtain information from the other service system using the LOMs. If the RH8100 V3 operates in single-system mode, the LOMs do not work. standard PCIe 2.0 к4 слот
НИЦ	Један ГЕ НИЦ са два или четири ГЕ порта Једна 10ГЕ НИЦ са два 10ГЕ порта
TPM or TCM	Choose a TPM or TCM as required. A TPM complies with the Trusted Computing Group (TCG) standards and protects the platform from viruses or unauthorized operations. A TCM is a hardware module that provides cryptography computation for a trusted computing platform and has protected storage space.
USB flash drive	Provides a maximum capacity of 8 ГБ.
Hot-swappable PCIe card	Hot-swappable PCIe 3.0 x8 and PCIe 3.0 x16 cards on the rear I/O module
Non-hot-swappable PCIe card	Non-hot-swappable PCIe 3.0 x8 cards on the rear I/O module
Rear I/O module	Supports four hot-swappable PCIe cards and six non-hot-swappable PCIe cards.