ОптиКс БВС 1600Г | Хонгтелецом

Хуавеи БВС 1600Г

Марка: Хуавеи

Модел: ОптиКс БВС 1600Г

Детаљ:ОптиКс БВС 1600Г Капацитет преноса система типа И може се надоградити до 1600 Гбит / с додавањем модула од 400 Капацитет Гбит / с. У модулу од 400 Гбит.

Стање: Потпуно ново запечаћено

Доступност: НА ЛАГЕРУ

Категорија: Хуавеи ДВДМ ОТН Ознаке: ХонгТелецом, ОптиКс БВС 1600Г цена, ОптиКс БВС 1600Г, OptiX BWS1600G, ОптиКс БВС1600Г цена, huawei BWS1600G, BWS1600G, huawei BWS 1600G, BWS 1600G

Опис
Спецификација
Информације за наручивање
Упит

An OptiX BWS 1600G system adopts an ETSI300-119-3 standard cabinet. Стога, the system is rational in cabinet structure and graceful in appearance.

The main frame of the cabinet is a rack with a door fixed at the front, a rear door with air vents fixed at the back and movable side doors at both sides. The power box is mounted at the top. The DCM frame and the HUB frame are installed at the bottom of the cabinet. The subracks are installed in the middle of the cabinet.

The cabinet features the following:

The cabinet has a front door. Besides, each subrack is equipped with a door that provides a good shelter for the subrack.
The cabinet leaves much space for routing and managing optical fibers and cables.
Two movable side doors are installed at both sides of the cabinet. Each side door can move in or move out along a slide rail on the top and the bottom of the cabinet.
Air vents are provided at the front door of the subrack, the rear door and upper enclosure frame of the cabinet to ensure heat dissipation.

Technical specifications of the cabinet
Предмет	2-m High Cabinet	2.2-m High Cabinet	2.6-m High Cabinet
Димензије (Висина к ширина к дубина)	2000 мм к 600 мм к 300 мм (78.8 у. Икс 23.6 у. Икс 11.8 у.)	2200 мм к 600 мм к 300 мм (86.6 у. Икс 23.6 у. Икс 11.8 у.)	2600 мм к 600 мм к 300 мм (102.3 у. Икс 23.6 у. Икс 11.8 у.)
Тежина (Includes the empty cabinet and power box.)	56 кг (123 фунта.)	60 кг (132 фунта.)	67 кг (148 фунта.)
Максимална потрошња енергије	1300 В	2000 В	2000 В
Nominal working voltage	-48 V DC/-60 V DC	-48 V DC/-60 V DC	-48 V DC/-60 V DC
Распон радног напона	-38.4 В то -57.6 V DC/-48 V to -72 В ДЦ	-38.4 В то -57.6 V DC/-48 V to -72 В ДЦ	-38.4 В то -57.6 V DC/-48 V to -72 В ДЦ

Description of the interfaces in the interface area enhanced subrack
Приступ		Цоннецтор	Функција
ETHERNET1^а		РЈ-45	Serves as the Telecom management network (TMN) interface and local NE management interface. It connects to the ETHERNET2 interface on another subrack through cross-over network cables, to achieve the inter-subrack communication concatenation.
ETHERNET2^а		РЈ-45	Serves as the communication interface with the ROP board in the remote optical pumping amplifier (ROPA) систем. When the WMU is configured for centralized wavelength monitoring, ETHERNET2 can be used as a backup network interface for inter-subrack communication. It connects to the ETHERNET1 interface on another subrack through cross-over network cables, to achieve the inter-subrack communication concatenation.
PHONE1/PHONE2/PHONE3		РЈ-45	Serves as the orderwire phone interface that uses the optical supervisory channel (OSC) and electrical supervisory channel (ESC). Обезбеђује спољне алармне портове са три улаза и једним излазом 64 kbit/s orderwire voice channel for direct orderwire communication between terminals.
CLOCK	IN1–IN2	SMB	Serve as two clock input 75-ohm interfaces to access 2048 kbit/s or 2048 kHz clock signals from the equipment at the local station.
CLOCK	OUT1–OUT4	SMB	Serve as four clock output 75-ohm interfaces to output 2048 kbit/s or 2048 kHz clock signals to the equipment at the local station.
OCU CLKIN		SMB	Serve as two external clock source interfaces for the board in the system of the early version.
Ф&f		DB9	Possesses all the features of RS-232 interface. Serves only as an interface for software internal testing.
Serial 1		DB9	Uses the F2 byte of the supervisory channel and possesses the features of both RS-232 and RS-422 interfaces. The maximum rate is 19.2 кбит/с.
Serial2		DB9	Uses the F3 byte of the supervisory channel and possesses the features of both RS-232 and RS-422 interfaces. The maximum rate is 19.2 кбит/с.
АЛМ		DB9	Serves for subrack alarm output. The ALM communicates with the PMU board located in the power box. The ALM is connected with the subrack communication interface (SERIAL) on the power box panel.
F1		DB9	Serves as a 64 kbit/s co-directional data interface.
Могућност конфигурисања било ког односа П или О функција како би се задовољиле потребе различитих врста услуга^а		DB9	Serves as a local NE management interface. Operation, administration and maintenance interface.
СНАГА		DB3	Serves as a subrack power supply interface.
а: Authentication is required before this port is connected. To be specific, you must log in to the NE using the NE administrator account for authentication.