Huawei MDU MA5623

~~$488.00~~ $288.00

Marca: Huawei

Model: MA5623

Detaliu: Huawei MA5623 GPON

Condiție: 100% Nou

Disponibilitate: ÎN STOC

Categorie: Huawei OLT MDU Etichete: GPON ONU, Huawei MDU, MA5622A, MA5623, MA5623A, Huawei MA5623, GPON MA5623, MA5623 Price, Huawei MA5623 Price

Descriere
Caracteristici
Informatii despre comanda
Anchetă

Aspect și structură

SmartAX MA5622A/MA5623/MA5623A modul de acces multi-serviciu (MA5622A/MA5623/MA5623A) is an optical network unit (EL-HER-IT) launched by Huawei.

The MA5622A/MA5623/MA5623A mainly applies to the fiber to the building (FTTB) și fibre la bordură (FTTC) scenarii. It can also be used as a mini digital subscriber line access multiplexer (DSLAM) to provide traditional data, voice and video services.

Produse similare：

MA5622A

MA5623A

Appearance and Ports

The MA5622A/MA5623/MA5623A este o 1 U-high box-shaped device.

The MA5622A provides three configuration models: 8 VDSL2 ports+8 POTS ports, 16 VDSL2 ports+16 POTS ports and 24 VDSL2 ports+24 POTS ports. The appearance of this three configuration models is the same.

The MA5623 provides one configuration model: 24 VDSL over POTS ports

The MA5623A provides two configuration models: 48 VDSL over POTS ports with DC and AC power supply modes.

describes the ports on the MA5622A/MA5623/MA5623A.

Aspectul MA5622A

Aspectul MA5623

Appearance of an AC-powered MA5623A

Appearance of an DC-powered MA5623A

**Masa 1** Ports on an AC-powered MA5622A/MA5623/MA5623A
Numele portului	Serigrafie	Numărul de porturi	Funcţie
AC/DC power port	Nici unul	1	Se conectează la 110 V/220 V AC power or 48 V DC putere. NOTĂ: Doar MA5623A supports the DC power port.
Punct de bază	Nici unul	1	Conectează dispozitivul la pământ.
Port optic de legătură în sus	Nici unul	2	Suporta trei tipuri de porturi: rețea optică pasivă capabilă de gigabit (GPON) și gigabit Ethernet (DA). Port GPON: Utilizează conectorul cu factor de formă mic (SFP) modul optic. GPON port use single-mode optical modules and support bidirectional data transmission over one fiber. Conectorul de fibră optică acceptat este SC/PC (UPC). Port optic GE: Utilizează conectorul cu factor de formă mic (SFP) modul optic. Suporta diferite distante de transmisie folosind diverse module optice SFP. Suportă module optice monomod și multimod. The supported optical fiber connector is LC/PC.
Port de rețea de întreținere	ETH	1	It is a 100M Base-T commissioning network port and supports 100 Mbit/s full-duplex autonegotiation.
Maintenance serial port/Environment monitoring port (Port RS-232)	CONSOLĂ	1	The MA5622A/MA5623/MA5623A oferă un port serial, care poate funcționa ca port serial de întreținere și port de rețea de întreținere în același timp după ce un cablu integrat de consolă-Ethernet este conectat la el. În timpul procesului de încărcare a BIOS-ului, acest port serial poate fi folosit doar ca port serial de întreținere. În acest caz, primul port de utilizator de pe dispozitiv poate fi folosit ca port de rețea de întreținere. Când dispozitivul rulează, funcțiile acestui port sunt următoarele: Poate fi folosit ca port serial de întreținere. În acest caz, puteți configura un port de utilizator pe dispozitiv pentru a gestiona dispozitivul la nivel local. Poate funcționa ca port serial de întreținere și port de rețea de întreținere în același timp după ce un cablu integrat de consolă-Ethernet este conectat la el. Când modul portului serial al MA5622A/MA5623/MA5623A este emu, poate fi conectat la unitatea de monitorizare a mediului (UEM) pentru a monitoriza parametrul digital. Portul poate fi folosit și pentru comunicarea între dispozitiv și bateriile Fe-litiu.
Battery port NOTĂ: Only the MA5622A and MA5623A support this port.	BAT-/BAT+	1	The port is used to connect the device to Fe-lithium or lead-acid batteries. The port uses a design that protects against inverse cable connector insertion, and the through-current capacity is 16 A. NOTĂ: The DC-powered MA5623A does not support the battery port.
Port senzor baterie NOTĂ: Only the MA5622A and MA5623A support this port.	SENZOR	1	Portul acceptă senzori externi de temperatură dacă dispozitivul folosește o sursă de alimentare CA și baterii plumb-acid. The port is used to activate Fe-lithium batteries if the device uses an AC power source and Fe-lithium batteries. NOTĂ: The DC-powered MA5623A does not support the battery sensor port.
Port de monitorizare a mediului	ALARMA	1	Suporta patru senzori digitali: starea ușii, protectie la supratensiune, cadru principal de distribuție, si senzori de fum.
VDSL2 port	MA5622A/MA5623: LINE MA5623A: xDSL0 and xDSL1	2	The VDSL2 port supports a maximum transmission distance of 3.5 km (11,482 picioare). The MA5622A provides an integrated port for VDLS2 and POTS services. The MA5623 prevede 24 VDSL over POTS ports. The MA5623 is not equipped with a built-in splitter and therefore needs to work with an external splitter. The MA5623A prevede 48 VDSL over POTS ports. The MA5623A is not equipped with a built-in splitter and therefore needs to work with an external splitter. NOTĂ: For pin assignments of the xDSL0/LINE portFor pin assignments of the xDSL1 port
Port POTS NOTĂ: Only the MA5622A supports this port.	PSTN	1	Acceptă accesul POTS și oferă VoIP, FoIP, și servicii MoIP. NOTĂ: For pin assignments of the POTS
Suport de fixare	Nici unul	2	Folosit pentru fixarea dispozitivului.

**Masa 2** Pin assignments of the xDSL0/LINE port
Pin	Signal	Pin	Signal	Pin	Signal	Pin	Signal
64	15	48	7	32	16	16	-
63	15	47	7	31	16	15	-
62	14	46	6	30	17	14	-
61	14	45	6	29	17	13	-
60	13	44	5	28	18	12	-
59	13	43	5	27	18	11	-
58	12	42	4	26	19	10	-
57	12	41	4	25	19	9	-
56	11	40	3	24	20	8	-
55	11	39	3	23	20	7	-
54	10	38	2	22	21	6	-
53	10	37	2	21	21	5	-
52	9	36	1	20	22	4	-
51	9	35	1	19	22	3	-
50	8	34	0	18	23	2	-
49	8	33	0	17	23	1	-

**Masa 3** Pin assignments of the xDSL1 port
Pin	Signal	Pin	Signal	Pin	Signal	Pin	Signal
64	39	48	31	32	47	16	-
63	39	47	31	31	47	15	-
62	38	46	30	30	46	14	-
61	38	45	30	29	46	13	-
60	37	44	29	28	45	12	-
59	37	43	29	27	45	11	-
58	36	42	28	26	44	10	-
57	36	41	28	25	44	9	-
56	35	40	27	24	43	8	-
55	35	39	27	23	43	7	-
54	34	38	26	22	42	6	-
53	34	37	26	21	42	5	-
52	33	36	25	20	41	4	-
51	33	35	25	19	41	3	-
50	32	34	24	18	40	2	-
49	32	33	24	17	40	1	-

**Masa 4** Pin assignments of the POTS
Pin	Signal	Pin	Signal	Pin	Signal	Pin	Signal
64	15	48	7	32	16	16	-
63	15	47	7	31	16	15	-
62	14	46	6	30	17	14	-
61	14	45	6	29	17	13	-
60	13	44	5	28	18	12	-
59	13	43	5	27	18	11	-
58	12	42	4	26	19	10	-
57	12	41	4	25	19	9	-
56	11	40	3	24	20	8	-
55	11	39	3	23	20	7	-
54	10	38	2	22	21	6	-
53	10	37	2	21	21	5	-
52	9	36	1	20	22	4	-
51	9	35	1	19	22	3	-
50	8	34	0	18	23	2	-
49	8	33	0	17	23	1	-

Indicatori

The MA5622A/MA5623/MA5623A provides various indicators on the panel to help users learn about the running status of the device.

shows the panel indicators provided by the MA5622A/MA5623/MA5623A describes the status and meanings of these indicators.

NOTĂ:

The Indicators of the MA5622A/MA5623/MA5623A is the simliar, we take the MA5623A de exemplu.

Indicators provided by the MA5623A

**Masa 1** Status and meanings of the indicators provided by the MA5622A/MA5623/MA5623A
Indicator	stare	Sens
PWR: indicator de stare a sursei de alimentare	Verde constant	Dispozitivul este pornit.
PWR: indicator de stare a sursei de alimentare	Dezactivat	Dispozitivul este oprit.
RUN/ALM: indicator de stare de funcționare	roșu: on for 0.25s and off for 0.25s repeatedly	Dispozitivul pornește.
	Verde: on for 1s and off for 1s repeatedly	The device is working properly.
	Roșu constant	Aparatul este defect.
LEGĂTURĂ: indicator de stare a legăturii (GE optical port and PON port) (GE is the abbreviation for gigabit Ethernet and PON is the abbreviation for passive optical network.)	Verde constant	Portul optic uplink primește semnale optice.
	Dezactivat	Portul uplink nu reușește să primească semnale optice sau o fibră optică nu este conectată la dispozitiv.
AUTH: indicator de autentificare (PON port)	Verde constant	The device is registered with the upper layer device successfully.
	Verde: on for 0.25s and off for 0.25s repeatedly	Dispozitivul se înregistrează cu dispozitivul din stratul superior.
	Dezactivat	The device registration fails or an optical fiber is not connected to the device.
ACT: data status indicator (Port optic GE)	Green and blinks	The GE optical port is transmitting or receiving data.
ACT: data status indicator (Port optic GE)	Dezactivat	No data is transmitted or received on the GE optical port.
Indicator of the POTS port NOTĂ: doar MA5622A supports this port and indicator.	Verde constant	At least one service port is busy.
	Dezactivat	Toate porturile sunt inactive.

Disiparea căldurii

MA5622A/MA5623/MA5623A acceptă o densitate mare a accesului utilizatorilor. în plus, the MA5622A/MA5623/MA5623A adopts an optimal design to implement wind cooling heat dissipation.

Two fans are located in the right side of the MA5622A/MA5623/MA5623A, used for ventilation of the chassis in the exhaust mode.

Fluxul de aer este după cum urmează: the cool air enters the MA5622A/MA5623/MA5623A at the left side, and is blown towards the right side by the fans, și, în sfârșit, exits at the right side of the MA5622A/MA5623/MA5623A

shows the airflow for the MA5622A/MA5623/MA5623A

Airflow for the MA5622A/MA5623/MA5623A

MA5622A/MA5623/MA5623A supports automatic setting the fan speed, the fan speed is automatically adjusted according to the temperature detected by the temperature sensor configured on the control board.

The fans of the MA5622A/MA5623/MA5623A support alarm report when the fan is blocked.

Scenarii de aplicare

This topic describes the application scenarios of the MA5622A/MA5623/MA5623A.

shows the position of the MA5622A/MA5623/MA5623A on the network and a typical network.

Position of the MA5622A/MA5623/MA5623A on the network

LAN: local area network	OLT: terminal de linie optică
VDSL2: very-high-speed digital subscriber line 2

NOTĂ:

Doar MA5622A supports the POTS service.

FTTB or FTTC network: The MA5622A/MA5623/MA5623A can be used in FTTB or FTTC scenarios to provide data, voice and video services for residential area users. Applied in the GPON network featuring wide coverage and low maintenance cost, the MA5622A works with the OLT to provide users with voice services or high-bandwidth data and video services, and to expand the access capacity of the OLT. The MA5623/MA5623A works with the OLT to provide users with high-bandwidth data and video services, and to expand the access capacity of the OLT.
Mini DSLAM network: The MA5622A/MA5623/MA5623A can function as a mini DSLAM to provide traditional data, voice and video services. unu MA5622A/MA5623/MA5623A or multiple MA5622A/MA5623/MA5623A devices (cascaded) can form a tree network suiting various service requirements. They can also form a Multiple Spanning Tree Protocol (MSTP) network to provide a load sharing function for redundant links and protect services.
NOTĂ:
- The MA5622A/MA5623/MA5623A supports cascading.
- In mini DSLAM scenarios, you are advised to cascade a maximum of three layers of devices to the MA5622A/MA5623/MA5623A in a tree network. In an MSTP ring network, you are advised to deploy a maximum of four MA5622A/MA5623/MA5623A devices on the ring.
- For more details about the FTTB or FTTC solutions, vezi FTTx Solution Overview.

caracteristicile produsului

Acest subiect descrie caracteristicile MA5622A/MA5623/MA5623A.

Vectoring Broadband Service Speedup

The MA5622A and MA5623A support the Vectoring technology to increase the very-high-speed digital subscriber line 2 (VDSL2) line rate.

NOTĂ:

Only the MA5622A and MA5623A support the Vectoring.

VDSL2 is a mainstream mode for last kilometer access and shows increasing importance in bandwidth usage. VDSL2 uses high frequency bands and therefore the inter-line crosstalk has an evident impact on line quality. The bandwidth in multi-pair access scenario is much lower than the bandwidth in single-pair access scenario. Crosstalk becomes a major factor affecting the VDSL2 performance.

The Vectoring technology uses Vectoring groups to jointly transmit signals in the downstream direction and receive signals in the upstream direction of a VDSL2 line. This function of the MA5622A/MA5623A helps cancel the far-end crosstalk (FEXT) and improve the performance of a VDSL2 line.

The Vectoring function brings the following values for carriers:

Increasing the bandwidth in multi-pair access scenarios so that the revenue per each VDSL2 user will grow greatly
Providing higher-bandwidth services over the existing VDSL2 lines

Operable IPTV Service

Supports Internet Group Management Protocol (IGMP) v2 and v3 to provide IPTV, high definition TV, and video conference services.

IPv6

The MA5622A/MA5623/MA5623A supports Internet Protocol version 6 (IPv6). Compared with IPv4, IPv6 features simplified packet header format, sufficient IP addresses, hierarchical IP address structure, flexible extension header, and enhanced neighbor discovery mechanism.
Supports IPv6 address management and allocation, IPv6 routing, quality of service (QoS) si securitate, Strat 2 transparent transmission, and multicast services.

One-Site Deployment and Plug-and-Play

Is free of software commissioning on site.
Supports offline deployment and plug-and-play.
Automatically obtains configuration data from the iManager U2000 network management system (U2000) and reports its status to the U2000 after going online. The configuration data automatically takes effect.

Întreținere de rutină Zero Touch

Supports remote fault location and troubleshooting.
Supports remote acceptance.
Supports remote upgrade and patch installation.

Proiectare fiabilitate clasa transportator

Respectă specificațiile de fiabilitate din clasa transportatorului.
Trece descărcarea electrostatică (ESD) Test.
Be able to start at a -25°C temperature and to work properly for extended periods of time at a temperature as low as -40°C.
Be able to work properly at a temperature as high as 65°C (temperature at the air intake vent of the cabinet) for extended periods of time.
Oferă funcții de protecție la supratensiune și anti-interferențe.
Supports user port protection as follows: 4 kV in common mode and in differential mode
Supports power protection as follows:
- Putere DC: 5 kV in common mode and 3 kV in differential mode
- Curent alternativ: 6 kV/5 kA in common mode and 6 kV/3 kA in differential mode
Uses an anticorrosion design, reduces the wires routed across the surface of the board, and optimizes the heat design by producing a temperature difference to prevent condensation.

Model: MA5623

Detaliu: Huawei MA5623 GPON

Disponibilitate: ÎN STOC

Huawei MDU MA5623