Huawei BWS 1600G
Marca: Huawei
Model: OptiX BWS 1600G
Detaliu:Capacitatea de transmisie OptiX BWS 1600G a sistemului de tip I poate fi actualizată până la 1600 Gbit / s prin adăugarea de module de 400 Capacitate Gbit / s. Într-un modul de 400 Gbit.
Condiție: Nou, sigilat
Disponibilitate: ÎN STOC
- Descriere
- Specificație
- Informatii despre comanda
- Anchetă
An OptiX BWS 1600G system adopts an ETSI300-119-3 standard cabinet. Prin urmare, the system is rational in cabinet structure and graceful in appearance.
The main frame of the cabinet is a rack with a door fixed at the front, a rear door with air vents fixed at the back and movable side doors at both sides. The power box is mounted at the top. The DCM frame and the HUB frame are installed at the bottom of the cabinet. The subracks are installed in the middle of the cabinet.
The cabinet features the following:
- The cabinet has a front door. Besides, each subrack is equipped with a door that provides a good shelter for the subrack.
- The cabinet leaves much space for routing and managing optical fibers and cables.
- Two movable side doors are installed at both sides of the cabinet. Each side door can move in or move out along a slide rail on the top and the bottom of the cabinet.
- Air vents are provided at the front door of the subrack, the rear door and upper enclosure frame of the cabinet to ensure heat dissipation.
Articol | 2-m High Cabinet | 2.2-m High Cabinet | 2.6-m High Cabinet |
---|---|---|---|
Dimensiuni (Înălțime x lățime x adâncime) | 2000 mm x 600 mm x 300 mm (78.8 în. X 23.6 în. X 11.8 în.) | 2200 mm x 600 mm x 300 mm (86.6 în. X 23.6 în. X 11.8 în.) | 2600 mm x 600 mm x 300 mm (102.3 în. X 23.6 în. X 11.8 în.) |
Greutate (Includes the empty cabinet and power box.) | 56 kg (123 livre.) | 60 kg (132 livre.) | 67 kg (148 livre.) |
Consum maxim de energie | 1300 W | 2000 W | 2000 W |
Nominal working voltage | -48 V DC/-60 V DC | -48 V DC/-60 V DC | -48 V DC/-60 V DC |
Gama de tensiune de lucru | -38.4 V to -57.6 V DC/-48 V to -72 V DC | -38.4 V to -57.6 V DC/-48 V to -72 V DC | -38.4 V to -57.6 V DC/-48 V to -72 V DC |
Interfață | Conector | Funcţie | |
---|---|---|---|
ETHERNET1 A | RJ-45 | Serves as the Telecom management network (TMN) interface and local NE management interface.
It connects to the ETHERNET2 interface on another subrack through cross-over network cables, to achieve the inter-subrack communication concatenation. |
|
ETHERNET2 A | RJ-45 |
|
|
PHONE1/PHONE2/PHONE3 | RJ-45 | Serves as the orderwire phone interface that uses the optical supervisory channel (OSC) and electrical supervisory channel (ESC). Oferă un 64 kbit/s orderwire voice channel for direct orderwire communication between terminals. | |
CLOCK | IN1–IN2 | SMB | Serve as two clock input 75-ohm interfaces to access 2048 kbit/s or 2048 kHz clock signals from the equipment at the local station. |
OUT1–OUT4 | SMB | Serve as four clock output 75-ohm interfaces to output 2048 kbit/s or 2048 kHz clock signals to the equipment at the local station. | |
OCU CLKIN | SMB | Serve as two external clock source interfaces for the board in the system of the early version. | |
F&f | DB9 | Possesses all the features of RS-232 interface. Serves only as an interface for software internal testing. | |
Serial 1 | DB9 | Uses the F2 byte of the supervisory channel and possesses the features of both RS-232 and RS-422 interfaces. The maximum rate is 19.2 kbit / s. | |
Serial2 | DB9 | Uses the F3 byte of the supervisory channel and possesses the features of both RS-232 and RS-422 interfaces. The maximum rate is 19.2 kbit / s. | |
AL | DB9 | Serves for subrack alarm output. The ALM communicates with the PMU board located in the power box. The ALM is connected with the subrack communication interface (SERIAL) on the power box panel. | |
F1 | DB9 | Serves as a 64 kbit/s co-directional data interface. | |
OAM A | DB9 | Serves as a local NE management interface. Operation, administration and maintenance interface. | |
PUTERE | DB3 | Serves as a subrack power supply interface. | |
A: Authentication is required before this port is connected. Pentru a fi concret, you must log in to the NE using the NE administrator account for authentication. |
Model: OptiX BWS 1600G
Detaliu:Capacitatea de transmisie OptiX BWS 1600G a sistemului de tip I poate fi actualizată până la 1600 Gbit / s prin adăugarea de module de 400 Capacitate Gbit / s. Într-un modul de 400 Gbit .
Condiție: Nou, sigilat
Disponibilitate: ÎN STOC