RTN 950A
Brand: Huawei
Model: RTN 950A
Detail:The huawei RTN 950A is 2 U high IDU , Integrated service ports on system control, switching, and timing boards.
Condition: Brand New Sealed
Availability: IN STOCK
- Description
- Specification
- Ordering information
- Inquiry
The OptiX RTN 950A adopts a split structure. The system consists of the IDU 950A and the ODU. Each ODU is connected to the IDU 950A through an IF cable.
The IDU 950A is the indoor unit for an OptiX RTN 950A system. It receives and multiplexes services, performs service processing and IF processing, and provides the system control and communications function.
Product Highlights of OptiX RTN 950A V100R010C00
Ultra-High-Order Modulation 4096QAM
The ultra-high-order modulation scheme 4096QAM is supported by new-generation IF boards ISM6. It delivers a service capacity about 45% higher than traditional 256QAM, meeting high-bandwidth requirements in the LTE era.
112 MHz Channel Spacing
ISM6 boards support 112 MHz channel bandwidth. If spectrum conditions are met, one pair of ISM6 boards can be used with 32 GHz XMC-3 ODUs to provide 830 Mbit/s to 1 Gbit/s service throughput per link without enabling Ethernet frame header compression, , reducing CAPEX in building networks. Traditionally, when 56 MHz channel bandwidth is used, two pairs of IF boards and ODUs can be used to provide the same service throughput.
High Integration
The ISM6 board adopts high-density design, and provides two IF ports.
- Two IF channels can be flexibly configured as 2+0 or 2x(1+0). They can also be used to achieve intra-board XPIC, intra-board PLA, intra- or inter-board 1+1 protection, intra- or inter-board EPLA, and XPIC 1+1 protection for two boards. PLA/EPLA can be coupled with XPIC.
- Using ISM6 boards and XMC ODUs, a single NE supports a maximum of 10 microwave links, which simplifies the deployment of high-density aggregation sites with multiple directions.
Physical Link Aggregation
Physical link aggregation aggregates microwave links and implements load sharing over these aggregated microwave links based on physical layer bandwidth. Physical link aggregation does not use the Hash algorithm and is independent of service flow compositions and therefore makes full use of link bandwidth. Physical link aggregation works in the following modes:
- PLA mode: In this mode, IF boards distribute traffic, and two physical links can be aggregated as a group.
- EPLA mode: In this mode, the packet switching unit distributes traffic, and a maximum of 4physical links can be aggregated as a group.
- EPLA+ mode: In this mode, the packet switching unit distributes traffic, and a maximum of eight physical links can be aggregated as a group. An EPLA+ group must contain links provided by ISM6 boards.
| Type | RTN 905 2E | RTN 950 | RTN 950A |
| Scenarios | Split-mount, tail site access | Split-mount, Hub site aggregation | Split-mount, Hub site aggregation |
| Size | 442mm × 220mm × 44mm(1U) | 442mm × 220mm × 88mm(2U) | 442mm × 220mm × 88mm(2U) |
| Frequency | 6/7/8/10/10.5/11/13/15/18/23/26/28/32/ 38/42 GHz |
6/7/8/10/10.5/11/13/15/18/23/26/28/32/ 38/42 GHz |
6/7/8/10/10.5/11/13/15/18/23/26/28/32/ 38/42 GHz |
| Channel Spacing | 3.5/7/14/28/40/50/56 MHz | 3.5/7/14/28/40/50/56/112 MHz | 3.5/7/14/28/40/50/56/112 MHz |
| Modulation | QPSK Strong，QPSK，16QAM Strong，16QAM，32QAM，64QAM，128QAM，256QAM，512QAM，512QAM Light，1024QAM，1024QAM Light，2048QAM | QPSK Strong，QPSK，16QAM Strong，16QAM，32QAM，64QAM，128QAM，256QAM，512QAM，512QAM Light，1024QAM，1024QAM Light，2048QAM，4096QAM | QPSK Strong，QPSK，16QAM Strong，16QAM，32QAM，64QAM，128QAM，256QAM，512QAM，512QAM Light，1024QAM，1024QAM Light，2048QAM，4096QAM |
| Max. RF Directions | 2 | 8 | 10 |
| Maximum Air-interface Service Throughput | 504～636 Mbit/s | 1018～1283 Mbit/s | 1018～1283 Mbit/s |
| Switching Capacity | 8 Gbit/s | 10 Gbit/s | 10 Gbit/s |
| TDM Cross-connections | 8×8 VC-4 | 32×32 VC-4 | 32×32 VC-4 |
| Service Ports | E1, STM-1(e/o), FE(e/o), GE(e/o), 2.5GE(o) | E1, STM-1(e/o), FE(e/o), GE(e/o), 2.5GE(o), 10GE(o) | E1, T1, STM-1(e/o), FE(e/o), GE(e/o), 2.5GE(o), 10GE(o) |
| RF Configuration | 2×（1+0） 2+0 1+1 HSB/SD/FD XPIC |
N+0（N≤8） N×（1+0）（N≤8） 1+1 HSB/SD/FD N+1（N≤7） XPIC |
N+0（N≤10） N×（1+0）（N≤10） 1+1 HSB/SD/FD N+1（N≤7） XPIC |
Model: RTN 950A
Detail: The huawei RTN 950A is 2 U high IDU , Integrated service ports on system control, switching, and timing boards .
Availability: IN STOCK
Related Products
-
RTN 380
Brand: Huawei
Model: RTN 380
Detail:The huawei RTN 380 operates at 71-76 GHz or 81-86 GHz frequency bands .
Condition: Brand New Sealed
Availability: IN STOCK
-
RTN 980L
Brand: Huawei
Model: RTN 980L
Detail:The huawei RTN 980L Service Ports include E1, STM-1(e/o), STM-4(o), FE(e/o), GE(e/o), 2.5GE(o), 10GE(o) .
Condition: Brand New Sealed
Availability: IN STOCK
-
RTN 380H
Brand: Huawei
Model: RTN 380H
Detail:The huawei RTN 380H 10GE E-band Microwave .
Condition: Brand New Sealed
Availability: IN STOCK
-
Huawei RTN 950A CSHO RTN950A
Brand: Huawei
Model: OptiX RTN 950A
Detail: Huawei RTN 950A Microwave ISV3 ISX2 ISU2 CSHO RTN950A
Condition: 100% New
Availability: IN STOCK
$4,800.00$2,500.00 -
RTN510 AP
Brand: Huawei
Model: RTN510 AP
Detail:The huawei RTN510 AP Microwave is 1*GE(o) + 1* GE(e) + 1*GE (PoE) ports .
Condition: Brand New Sealed
Availability: IN STOCK
-
Huawei RTN950A
Huawei RTN950A,Huawei RTN950A, Huawei RTN950A pic, Huawei RTN950A picture, Huawei RTN950A photo.
-
RTN 905
Brand: Huawei
Model: RTN 905
Detail:The huawei RTN 905 is 1 U high IDU with One or two microwave links .
Condition: Brand New Sealed
Availability: IN STOCK
-
RTN510 RT
Brand: Huawei
Model: RTN510 RT
Detail:The huawei Microwave RTN510 RT with 1*GE (PoE) ports .
Condition: Brand New Sealed
Availability: IN STOCK
-
RTN 950
Brand: Huawei
Model: RTN 950
Detail:The huawei RTN 950 is 2 U high IDU , 1+1 protection for system control, switching, and timing boards.
Condition: Brand New Sealed
Availability: IN STOCK
-
RTN 320
Brand: Huawei
Model: RTN 320
Detail:The huawei RTN 320 Channel Spacing ETSI: 7/14/28/40/56/112 MHz ,and FCC: 30/40/50 MHz .
Condition: Brand New Sealed
Availability: IN STOCK
