RTN 905

Brand: Huawei

Model: RTN 905

Detail:The huawei RTN 905 is 1 U high IDU with One or two microwave links .

Condition: Brand New Sealed

Availability: IN STOCK

  • Description
  • Specification
  • Ordering information
  • Inquiry

The OptiX RTN 905 adopts a split structure. The system consists of the IDU 905 and the ODU. Each ODU is connected to the IDU 905 through an IF cable.

The IDU 905 is the indoor unit for an OptiX RTN 905 system. It receives and multiplexes services, performs service processing and IF processing, and provides the system control and communications function.

RTN905

Alice card

Product Highlights

10GE port

The OptiX RTN 905 2F provides a maximum of four 10GE ports, with each port providing 10 Gbit/s bandwidth. Therefore, multiple GE ports do not need to be used to configure LAG for load sharing. This reduces deployment costs, simplifies installation, and meets upstream capacity requirements raised by an increasing number of access sites.

High density and Ultra-High-Order modulation 8192QAM

Is a 1 U standard chassis and provides up to 4x10GE, 6xGE, 2xSTM-1, and 16xE1 ports.
The OptiX RTN 905 2F supports 112 MHz channel bandwidth. Compared with the traditional 56 MHz channel bandwidth, the 112 MHz channel bandwidth doubles the service capacity of a single channel, reducing CAPEX in building networks.
Supports the 8192QAM modulation scheme.
On-demand application and flexible expansion

Provides OptiX RTN 905 1E with one IF board and OptiX RTN 905 2E/2F with two IF boards.
Provides more microwave link directions or implements more functions by NE cascading.

Type

IDU 905 1E

IDU 905 2E

IDU 905 2F

Chassis height

1U

Extended subcard

Supported

Service interface

  • 4 x GE electronic interface
  • 4 x GE/FE optical interface or GE electrical interface (SFP)b
  • 2 x 2.5GE optical interface (SFP+/SFP)c
  • 16 x E1 interface
  • 1 x multifunction cascading interfacea, b
  • 1 x E1 services cascading interfaceb
  • 2 x STM-1 interface
  • 2 x 10GE optical interface (SFP+)a
  • 2 x 10GE/2.5GE/GE/FE optical interface or GE electrical interface (SFP+/SFP)a
  • 2 x 2.5GE/GE/FE optical interface or GE electrical interface (SFP+/SFP)
  • 4 x GE electrical interface
  • 2 x STM-1 interface
  • 16 x E1 interface

Radio type

  • Integrated IP radio (E1 + Ethernet)
  • Integrated IP radio (STM-1 + Ethernet)
  • SDH radio

Highest modulation

2048QAM

8192QAM

Number of radio directions

1

2

2

RF configuration mode

  • 1+0
  • 1+1 HSB/FD/SD (NE cascading)
  • XPIC (NE cascading)
  • 2x(1+0)
  • 2+0
  • 1+1 HSB/FD/SD
  • Intra-board XPIC
  • 2x(1+0)
  • 2+0
  • 1+1 HSB/FD/SD
  • Intra-board XPIC

Model: RTN 905

Detail: The huawei RTN 905 is 1 U high IDU with One or two microwave links .

Availability: IN STOCK

Contact Us