Huawei RTN 980 Microwave RTN980

~~$4,800.00~~ $2,600.00

Brand: Huawei

Model: OptiX RTN 980

Detail: Huawei RTN 980 Microwave CSHNU CSHNA CSHN Board RTN980

Condition: 100% New

Availability: IN STOCK

Description
Features
Ordering information
Inquiry

Huawei RTN 980 Microwave RTN980

The OptiX RTN 980 adopts a split structure. The system consists of the IDU 980 and the ODU. Each ODU is connected to the IDU 980 through an IF cable.

Huawei RTN 980 Microwave CSHNU CSHNA CSHN Board RTN980

Similar products：OptiX PMP 450,OptiX RTN 310,OptiX RTN 320,OptiX RTN 360,OptiX RTN 380,OptiX RTN 380e,OptiX RTN 905,OptiX RTN 905e,OptiX RTN 910,OptiX RTN 910A,OptiX RTN 950,OptiX RTN 950A,OptiX RTN 980,OptiX RTN 980L,RTN XMC,RTN380A,RTN380H,RTN510

Components

The OptiX RTN 980 adopts a split structure. The system consists of the IDU 980 and the ODU. Each ODU is connected to the IDU 980 through an IF cable.

IDU 980

The IDU 980 is the indoor unit for an OptiX RTN 980 system. It receives and multiplexes services, performs service processing and IF processing, and provides the system control and communications function.

Table 1 lists the basic features of the IDU 980.

**Table 1** Features of the IDU 980
Item	Description
Chassis height	5U
Pluggable	Supported
Number of radio directions	1 to 20
RF configuration mode	N+0 non-protection configuration Nx(1+0) non-protection configuration 1+1 protection configuration N+1 protection configuration XPIC configuration 4x4 MIMO configuration
Service interface type	Native E1 interface Smart E1 interface STM-1 optical/electrical interface STM-4 optical interface FE optical/electrical interface GE optical/electrical interface 2.5GE optical interface 10GE optical interface

Figure 1 Appearance of the IDU 980

ODU

The ODU is the outdoor unit for the OptiX RTN 900. It converts frequencies and amplifies signals.

The OptiX RTN 900 product series can use the RTN 600 ODU and RTN XMC ODU, covering the entire frequency band from 6 GHz to 42 GHz.

**Table 2** RTN XMC ODUs that the OptiX RTN 980 supports
ODU type	Description
ODU type	Frequency band	Highest-order Modulation	Channel spacing
XMC-2	6/7/8/10/10.5/11/13/15/18/23/26/28/32/38/42 GHz	2048QAM (13/15/18/23/38 GHz, 7/8 GHz XMC-2E) 1024QAM (6/10/10.5/11/26/28/32/42 GHz) 256QAM (7/8 GHz Normal)	3.5/7/14/28/40/50/56 MHz NOTE: The 10.5 GHz frequency band does not support 40/50/56 MHz channel spacing.
XMC-2H	6/7/8/11 GHz	2048QAM	7/14/28/40/56 MHz
XMC-3	7/8/11/13/15/18/23/26/28/32/38 GHz	4096QAM(7/8/11/13/15/18/23/26 GHz) 2048QAM (28/32/38 GHz)	3.5/7/14/28/40/56 MHz (7/8/11/13/15/18/23/26/28/38 GHz) 3.5/7/14/28/40/56/112 MHz (32 GHz)
XMC-3W	7/8/13/18/15/23 GHz	4096QAM	3.5/7/14/28/40/56 MHz
XMC-3H	18/23/28/38 GHz	8192QAM (28/40/56 MHz) 4096QAM (112 MHz) 2048QAM (14 MHz) 1024QAM (7 MHz)	3.5/7/14/28/40/56/112 MHz

**Table 3** RTN 600 ODUs that the OptiX RTN 980 supports
Item	Description
Item	High-Power ODU	Standard Power ODU	Low Capacity ODU
ODU type	HP, HPA	SP, SPA	LP
Frequency band	6/7/8/10/10.5/11/13/15/18/23/26/28/32/38 GHz (HP ODU) 6/7/8/11/13/15/18/23 GHz (HPA ODU)	7/8/11/13/15/18/23/26/38 GHz (SP ODU) 6/7/8/11/13/15/18/23 GHz (SPA ODU)	7/8/11/13/15/18/23 GHz
Highest-order Modulation	256QAM	256QAM	16QAM
Channel spacing	7/14/28/40/56 MHz (6/7/8/10/11/13/15/18/23/26/28/32/38 GHz) 7/14/28 MHz (10.5 GHz)	3.5/7/14/28 MHz	3.5/7/14/28 MHz

There are two methods for mounting the ODU and the antenna: direct mounting and separate mounting.

The direct mounting method is generally adopted when a small- or medium-diameter and single-polarized antenna is used. In this situation, if one ODU is configured for one antenna, the ODU is directly mounted at the back of the antenna. If two ODUs are configured for one antenna, an RF signal combiner/splitter (hence referred to as a hybrid coupler) must be mounted to connect the ODUs to the antenna. Figure 2 illustrates the direct mounting method.

The direct mounting method can also be adopted when a small- or medium-diameter and dual-polarized antenna is used. Two ODUs are mounted onto an antenna using an orthomode transducer (OMT). The method for installing an OMT is similar to that for installing a hybrid coupler.

Figure 2 Direct mounting
The separate mounting method is adopted when a large- or medium-diameter and single- or dual-polarized antenna is used. Figure 3 shows the separate mounting method. In this situation, a hybrid coupler can be mounted (two ODUs share one feed boom).

Figure 3 Separate mounting

NOTE:

The OptiX RTN 980 provides an antenna solution that covers the entire frequency band, and supports single-polarized antennas and dual-polarized antennas with diameters of 0.3 m to 3.7 m along with the corresponding feeder system.

Chassis Structure

The dimensions (H x W x D) of the IDU 980 chassis are 225 mm x 442 mm x 220 mm. The IDU 980 chassis has a air-cooled ten-layered structure.

Figure 1 shows the chassis structure of the IDU 980.

Figure 1 Structure of the IDU 980 chassis

Figure 2 Slots of the IDU 980

Board List

The IDU 980 provides various functions with different boards inserted.

Figure 1 IDU slot layout

NOTE:

"EXT" represents an extended slot, which can house any type of IF board or interface board.

**Table 1** List of the IDU boards
Board Acronym	Board Name	Valid Slot	Required System Control Board	Description
CSHN	Hybrid system control, switching, and timing board	Slot 15/20	-	Provides TDM cross-connections: 128x128 VC-4 higher-order cross-connections and lower-order cross-connections equivalent to 32x32 VC-4s. Provides a packet switching capacity of 22 Gbit/s. Performs system communication and control. Supports the clock processing function, providing one external clock input/output port and two external time input/output ports. The first external time port uses the same physical connector as the external clock port. Provides one Ethernet NM port, one NM serial port, and one NM cascading port. Provide two STM-4 optical ports or two STM-1 optical/electrical ports equipped with SFP modules. Provides two GE ports using the RJ45 electrical modules or SFP optical modules. Provides one Huawei outdoor cabinet monitoring port, which uses the same physical connector as the second external time port.
CSHNA	Hybrid system control, switching, and timing board	Slot 15/20	-	Provides TDM cross-connections: 128x128 VC-4 higher-order cross-connections and lower-order cross-connections equivalent to 32x32 VC-4s. Provides a packet switching capacity of 43 Gbit/s. Performs system communication and control. Supports anti-Theft function. Supports the clock processing function, providing one external clock input/output port and two external time input/output ports. The first external time port uses the same physical connector as the external clock port. Provides one Ethernet NM port, one NM serial port, and one NM cascading port. Provide two STM-4 optical ports or two STM-1 optical/electrical ports equipped with SFP modules. Provides four GE ports, of which two can be GE electrical ports (RJ45) or GE optical ports (SFP) and the other two can be only GE electrical (RJ45) ports. Provides a Type-A USB port that allows data to be backed up using a USB flash drive. Provides a Mini USB port for connecting a local maintenance terminal. Provides one Huawei outdoor cabinet monitoring port, which uses the same physical connector as the second external time port. Provides three-input and one-output external alarm ports.
CSHNU	Hybrid system control, switching, and timing board	Slot 15/20	-	Provides TDM cross-connections: 128x128 VC-4 higher-order cross-connections and lower-order cross-connections equivalent to 32x32 VC-4s. Provides a 120 Gbit/s packet switching capability. Performs system communication and control. Supports L3VPN. Supports Super Dual Band. Supports anti-Theft function. Supports the clock processing function, providing one external clock input/output port and two external time input/output ports. The first external time port uses the same physical connector as the external clock port. Provides one Ethernet NM port, one NM serial port, and one NM cascade port. Provide two STM-4 optical ports or two STM-1 optical/electrical ports equipped with SFP modules. Provides one 10GE port, two GE ports, and two GE electrical ports. Provides a Type-A USB port that allows data to be backed up using a USB flash drive. Provides a Mini USB port for connecting a local maintenance terminal. Provides one Huawei outdoor cabinet monitoring port, which uses the same physical connector as the second external time port. Provides three-input and one-output external alarm ports.
ISU2	Universal IF board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides one IF port. Supports modulation schemes from QPSK to 256QAM. Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode. Supports the AM function. Supports air-interface bandwidth acceleration (Ethernet frame header compression). Supports the PLA function. Supports the EPLA function when working with CSHNA.
ISX2	Universal XPIC IF board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides one IF port. Supports modulation schemes from QPSK to 256QAM. Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode. Supports the XPIC function. Supports the AM function. Supports the AM booster function. Supports air-interface bandwidth acceleration (Ethernet frame header compression). Supports the PLA function. Supports the EPLA function when working with CSHNA.
ISV3	Versatile IF board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides one IF port. Supports multiple IF running modes: IS3: The highest-order modulation mode is 2048QAM. When working in IS3 mode, ISV3 boards can interconnect with each other or with RTN 905s. NOTE: When working at a channel spacing 3.5 MHz, ISV3 boards can interconnect only with ISV3 boards. IS2: The highest-order modulation mode is 256QAM. When working in IS2 mode, ISV3 boards can interconnect with ISU2/ISX2 boards. Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode. Supports the XPIC function. Supports the AM function. Supports air-interface bandwidth acceleration (Ethernet frame header compression) and enhanced Ethernet frame compression (payload compression). Supports AES256-based encryption at air interfaces. Supports the PLA function. Supports the EPLA function when working with CSHNA. Supports anti-Theft function.
ISM6	Two-channel versatile IF board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides two IF ports. The two IF ports can be used together or independently. Supports multiple IF running modes: IS6-PLUS: The highest-order modulation mode is 4096QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 2048QAM). IS6: The highest-order modulation mode is 4096QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 2048QAM). IS3: The highest-order modulation mode is 2048QAM. When working in IS3 mode, ISM6 boards can interconnect with ISV3 boards or RTN 905s. IS2: The highest-order modulation mode is 256QAM. When working in IS2 mode, ISM6 boards can interconnect with ISU2/ISX2 boards. Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode. Supports 1+1 protection for two intra- or inter-board IF channels. Supports XPIC for two intra-board IF channels. Supports use of two boards to provide 1+1 protection for XPIC groups. Supports intra-board PLA. Supports EPLA when working with the CSHNA board. Supports AM. Supports air-interface bandwidth acceleration (Ethernet frame header compression). Supports the multiple-input and multiple-output (MIMO) function. Supports anti-Theft function.
ISM8	Dual-channel versatile IF board	Slot 1 to Slot 14	CSHNA/CSHNU	Provides two IF ports. The two IF ports can be used together or independently. Supports multiple IF running modes: IS8: The highest-order modulation mode is 8192QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 4096QAM). IS6: The highest-order modulation mode is 4096QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 2048QAM). IS3: The highest-order modulation mode is 2048QAM. When working in IS3 mode, ISM6 boards can interconnect with ISV3 boards or RTN 905s. Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode. Supports 1+1 protection for two intra- or inter-board IF channels. Supports XPIC for two intra-board IF channels. Supports use of two boards to provide 1+1 protection for XPIC groups. Supports intra-board PLA. Supports EPLA. Supports AM. Reserves hardware ready for MIMO.
IF1	SDH IF board	Slot 1 to Slot 14	CSHN/CSHNA	Provides one IF port. Supports modulation schemes from QPSK to 128QAM. Supports the TU-based PDH microwave solution and the STM-1-based SDH microwave solution.
IFU2	Universal IF board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides one IF port. Supports modulation schemes from QPSK to 256QAM. Supports integrated IP microwave using the Native E1+Ethernet service mode. Supports the AM function.
IFX2	Universal XPIC IF board	Slot 1 to Slot 14	CSHN/CSHNA	Provides one IF port. Supports modulation schemes from QPSK to 256QAM. Supports integrated IP microwave using the Native E1+Ethernet service mode. Supports the XPIC function. Supports the AM function.
SL1D	2xSTM-1 interface board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Uses SFP modules to provide two STM-1 optical/electrical ports.
SL1DA	2xSTM-1 interface board	Slot 1 to Slot 6	CSHN/CSHNA/CSHNU	Uses SFP modules to provide two STM-1 optical/electrical ports. Support K-byte transparent transmission.
CQ1	4-port channelized STM-1 interface board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Uses the SFP optical modules to provide four channelized STM-1 optical/electrical ports. Supports CES E1 and ML-PPP E1 processing for E1s in STM-1 frames. Transmits overhead bytes over CES E1s.
EM6T	6-port RJ45 Ethernet/Gigabit Ethernet interface board	Slot 1 to Slot 14	CSHN/CSHNA	Provides four FE electrical ports. Provides two GE electrical ports that are compatible with FE electrical ports. Supports synchronous Ethernet.
EM6F	4-port RJ45 + 2-port SFP Fast Ethernet/Gigabit Ethernet interface board	Slot 1 to Slot 14	CSHN/CSHNA	Provides four FE electrical ports. Uses SFP modules to provide two GE/FE optical ports or GE electrical ports. The GE electrical ports are compatible with the FE electrical ports. Supports synchronous Ethernet.
EM6TA	6-port RJ45 Ethernet/Gigabit Ethernet interface board	Slot 1 to slot 14	CSHN/CSHNA	Provides four FE electrical ports. Provides two GE electrical ports that are compatible with FE electrical ports. Supports synchronous Ethernet. Supports the IEEE 1588v2 and ITU-T G.8275.1.
EM6FA	4-port RJ45 + 2-port SFP Fast Ethernet/Gigabit Ethernet interface board	Slot 1 to slot 14	CSHN/CSHNA	Provides four FE electrical ports. Uses SFP modules to provide two GE/FE optical ports or GE electrical ports. The GE electrical ports are compatible with the FE electrical ports. Supports synchronous Ethernet. Supports the IEEE 1588v2 and ITU-T G.8275.1.
EM6	4-port RJ45/SFP + 2-port RJ45 Fast Ethernet/Gigabit Ethernet interface board	slot 1 to slot 14	CSHNA/CSHNU	Provides four GE ports and two FE electrical ports, of which the GE ports can be RJ45 GE electrical ports or SFP GE optical ports. The GE electrical ports are compatible with the FE electrical ports. Supports synchronous Ethernet. Supports the IEEE 1588v2 and ITU-T G.8275.1.
EG4	2-port RJ45/SFP + 2-port RJ45 Gigabit Ethernet interface board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides four GE ports, of which two can be RJ45 GE electrical ports or SFP GE optical ports and the other two can only be RJ45 GE electrical ports. The GE electrical ports are compatible with the FE electrical ports. Supports synchronous Ethernet. Supports the IEEE 1588v2 and ITU-T G.8275.1. Supports anti-Theft function.
EG4P	2-port RJ45/SFP + 2-port RJ45 Gigabit Ethernet interface board, providing the power supply function	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides four GE ports, of which two can be RJ45 GE electrical ports or SFP GE optical ports and the other two can only be RJ45 GE electrical ports supporting the power over Ethernet function. The GE electrical ports are compatible with the FE electrical ports. Supports synchronous Ethernet. Supports the IEEE 1588v2 and ITU-T G.8275.1. Supports anti-Theft function.
EX1	1x10GE interface board	Slot 1/2	CSHNA/CSHNU	Uses XFP modules to provide one 10GE port. Supports synchronous Ethernet. Supports IEEE 1588v2 and ITU-T G.8275.1.
EFP8	8-port RJ45 FE EoPDH processing board with the switching function	Slot 1 to Slot 14	CSHN/CSHNA	Provides eight FE electrical ports. Bridges to the packet plane through one internal GE port. Processes EoPDH services. The total VCG bandwidth is 63xE1. Supports transparently transmitted services and L2 switched services. Supports synchronous Ethernet.
EMS6	4-port RJ45 and 2-port SFP FE/GE EoSDH processing board, providing the switching function	Slot 1 to Slot 14	CSHN/CSHNA	Provides four FE electrical ports. Uses SFP modules to provide two GE optical ports or GE electrical ports. The GE electrical ports are compatible with the FE electrical ports. Bridges to the packet plane through one internal GE port. Processes EoSDH services. The total VCG bandwidth is 622 Mbit/s. Supports transparently transmitted Ethernet services and L2 switched services. Supports synchronous Ethernet.
ML1	16xE1 (Smart) tributary board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides sixteen 75-ohm or 120-ohm Smart E1 ports. Supports CES E1, ATM/IMA E1, ML-PPP E1, and Fractional E1 functions.
MD1	32xE1 (Smart) tributary board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides thirty-two 75-ohm or 120-ohm Smart E1 ports. Supports CES E1, ATM/IMA E1, ML-PPP E1, and Fractional E1 functions.
SP3S	16xE1 tributary board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides sixteen 75-ohm or 120-ohm TDM E1 ports.
SP3D	32xE1 tributary board	Slot 1 to Slot 14	CSHN/CSHNA/CSHNU	Provides thirty-two 75-ohm or 120-ohm TDM E1 ports.
AUX	Auxiliary interface board	Slot 1 to Slot 14	CSHN/CSHNA	Provides one orderwire port, one asynchronous data port, one synchronous data port, and four-input and two-output external alarm ports.
PIU/PIUA	Power board	Slot 26/27	CSHN/CSHNA/CSHNU	Provides one -48 V/-60 V DC power input.
FAN	Fan board	Slot 28	CSHN/CSHNA/CSHNU	Air-cools the IDU.