Huawei OSN 1500B

Brand: Huawei

Model:OptiX OSN 1500B

Detail:The OptiX OSN 1500B subrack has a two-layer structure. The subrack consists of a processing board area, an interface board area, an auxiliary interface board area, a power interface board area, a fan area and a cable routing area.

Condition: Brand New Sealed

Availability: IN STOCK

  • Description
  • Specification
  • Ordering information
  • Inquiry

The OptiX OSN equipment uses the built-in WDM technology to transmit several wavelengths over one optical fiber. In this manner, the OptiX OSN equipment can be interconnected with the WDM equipment.

The OptiX OSN 1500 provides the built-in WDM technology. The functions of the equipment are as follows:

  • Standard DWDM wavelengths that comply with ITU-T G.694.1 can be added or dropped.
  • Standard CWDM wavelengths that comply with ITU-T G.694.2 can be added or dropped.
  • A set of equipment can be configured into an Optical Terminal Multiplexer (OTM) or an Optical Add/Drop multiplexer (OADM), or both.
  • Optical add/drop multiplexing boards have concatenation ports which can be used for expansion or for adding/dropping multiple wavelengths through concatenation.
  • The equipment supports Raman amplifiers which can be used in long-distance signal transmission.
  • The equipment supports the automatic gain control technology, which enables the gain of each working wavelength to change within an allowed range in all scenarios.
  • The equipment supports the forward error correction (FEC) technology, which can correct the errors generated during signal transmission and therefore improve the tolerance of signal-to-noise ratio at the receive end and extend the length of relay sections.

Application of built-in WDM technology

WDM

Protection schemes that the SDH boards of the OptiX OSN equipment support

Board Protection Scheme
Two-Fiber Ring MSP Four-Fiber Ring MSP Linear MSP SNCP SNCTP SNCMP MSP and SNCP Fiber-Shared Protection TPS Protection
N1SL64 Y Y Y Y Y Y Y N
N2SL64 Y Y Y Y Y Y Y N
N4SL64 Y Y Y Y Y Y Y N
N1SF64A Y Y Y Y Y Y Y N
N4SF64 Y Y Y Y Y Y Y N
N4SFD64 Y Y Y Y Y Y Y N
N1SLD64 Y Y Y Y Y Y Y N
N4SLD64 Y Y Y Y Y Y Y N
N1SL16 Y Y Y Y Y Y Y N
N2SL16 Y Y Y Y Y Y Y N
N3SL16 Y Y Y Y Y Y Y N
N1SL16A Y Y Y Y Y Y Y N
N2SL16A Y Y Y Y Y Y Y N
N3SL16A Y Y Y Y Y Y Y N
N1SLD16 Y Y Y Y Y Y Y N
N1SLQ16 Y Y Y Y Y Y Y N
N4SLQ16 Y Y Y Y Y Y Y N
N1SLO16 Y Y Y Y Y Y Y N
N4SLO16 Y Y Y Y Y Y Y N
N1SF16 Y Y Y Y Y Y Y N
N1SF16E Y Y Y Y Y Y Y N
N3SLQ41 Y

Y Y Y Y Y Y N
N3SLH41 Y

Y Y Y Y Y Y N
N1SL4 Y Y Y Y Y Y Y N
N2SL4 Y Y Y Y Y Y Y N
N1SL4A Y Y Y Y Y Y Y N
R1SL4 Y Y Y Y Y Y Y N
N1SLQ4 Y Y Y Y Y Y Y N
N2SLQ4 Y Y Y Y Y Y Y N
N1SLQ4A Y Y Y Y Y Y Y N
N1SLD4 Y Y Y Y Y Y Y N
N2SLD4 Y Y Y Y Y Y Y N
N1SLD4A Y Y Y Y Y Y Y N
R1SLD4 Y Y Y Y Y Y Y N
N1SLT1 Y Y Y Y Y Y N N
N1SLQ1 Y Y Y Y Y Y N N
N2SLQ1 Y Y Y Y Y Y N N
N1SLQ1A Y Y Y Y Y Y N N
R1SLQ1 Y Y Y Y Y Y N N
N1SL1 Y Y Y Y Y Y N N
N2SL1 Y Y Y Y Y Y N N
N1SL1A Y Y Y Y Y Y N N
R1SL1 Y Y Y Y Y Y N N
N1SLH1 N N N N N YN N N
N1SEP1 Y Y Y Y Y Y N Y
N2SLO1 Y Y Y Y Y Y N N
N3SLO1 Y Y Y Y Y Y N N

Indicator and SpecificationsDescription
Dimensions (H x W x D)OptiX OSN 1500A: 131 mm x 444 mm x 262 mm
OptiX OSN 1500B: 221 mm x 444 mm x 263 mm
Number of valid slotsOptiX OSN 1500A: 10 (slots 2-9 and slots 12-13) for processing boards
OptiX OSN 1500B: 12 (slots 1-9 and slots 11-13) for processing boards and 4 for interface boards
Equipment capacityPacket8 Gbit/s
TDM60 Gbit/s higher order cross-connections and 20 Gbit/s lower order cross-connections
Service type supportedSDH, PDH, ATM, CES, Ethernet, PCM, SAN, video and others
Network topologyPoint-to-point, chain, star, ring, ring with chain, intersecting rings, tangent rings
Backup and protectionNetwork-level protection (packet)Tunnel 1:1/1+1 APS, PW 1:1/1+1 APS, LPT
Network-level protection (TDM)SDH protection: subnet connection protection, linear MSP, ring MSP, DNI protection, E1 SNCP, shared-fiber virtual path protection, optical-path-shared MSP
EoS protection: LCAS, LPT, STP/RSTP, MSTP, RPR, VP-Ring/VC-Ring protection
Device-level protectionPacket LAG
TDM: TPS, BPS, PPS, LAG, DLAG
1+1 hot backup for system control, switching, and timing units
1+1 hot backup for power input units
1:N protection for +3.3 V power supply of the board
Intelligent fan
Board protection modes under abnormal conditions
MaintenanceMPLS OAMCV, FFD, BDI, FDI, Ping, Traceroute
ETH OAM (packet)Ethernet service OAM: CC, LB, LT, LM (only single-ended LM), DM (only two-way DM)
Ethernet port OAM: OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection
ETH OAM (TDM)Ethernet service OAM: CC, LB, LT, OAM_Ping
Ethernet port OAM: OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection
SynchronizationPacketPhysical-layer clock
Synchronous Ethernet
CES ACR
TDMPhysical-layer clock
DCNOutband DCNHWECC, IP over DCC, OSI over DCC
Inband DCNHWECC, IP
Standard working voltageIf the standard voltage of the input power is -48 V, the power voltage ranges from -38.4 V to -57.6 V.
If the standard voltage of the input power is -60 V, the power voltage ranges from -48 V to -72 V.
Installation methodETSI cabinet, 19-inch cabinet, wall, desk
Equipment running environmentSubrack temperatureLong-time operation: 0ºC to 45ºC
Short-time operation: -5ºC to +55ºC
Subrack humidity (relatively)Long-time operation: 5-85%
Short-time operation: 5-95%
Reliability specificationsSystem availability0.999997671
Mean time to resolution (MTTR)1 h
Mean time between failures (MTBF)49.02 years

Model:OSN 1500B

Detail: The OptiX OSN 1500B subrack has a two-layer structure. The subrack consists of a processing board area, an interface board area, an auxiliary interface board area, a power interface board area, a fan area and a cable routing area.

Condition: Brand New Sealed

Availability: IN STOCK

Contact Us