Huawei OSN 1500A
Brand: Huawei
Model:OptiX OSN 1500A
Detail:The OptiX OSN 1500A subrack has only one layer structure. The subrack consists of a board area, an auxiliary interface board area, a power interface board area, a fan area, and a cable routing area.
Condition: Brand New Sealed
Availability: IN STOCK
- Description
- Specification
- Ordering information
- Inquiry
The OptiX OSN 1500 intelligent optical transmission system (the OptiX OSN 1500 for short) developed by Huawei is the next-generation intelligent optical transmission equipment.
The OptiX OSN 1500 is of a “universal switch” architecture. That is, the OptiX OSN 1500 can be used in packet mode or in TDM mode. When used with the other equipment of Huawei, the OptiX OSN 1500 supports various networking applications, such as the pure packet mode application, hybrid networking application (overlay networking of the packet mode and TDM mode), and pure TDM mode application. By using a proper networking solution, the data service and conventional SDH service can be processed in the optimal manner.
The OptiX OSN 1500 is mainly used at the access layer of the metropolitan area network (MAN). The network application scenarios are described as follows:
- In TDM networking, can be networked with the other OptiX transmission equipment (the OptiX OSN 9560, OptiX OSN 9500, OptiX OSN 7500 II, OptiX OSN 7500, OptiX OSN 3500 II, OptiX OSN 2500, OptiX OSN 3500, OptiX OSN 500, and OptiX OSN 550) to optimize carrier investment, achieving a full range of networking solutions at the access layer, convergence layer, and backbone layer.
- With the packet switching technology, can constitute a packet data transmission network with the other OptiX transmission equipment (the OptiX OSN 7500, OptiX OSN 7500 II, OptiX OSN 3500, OptiX OSN 500, OptiX OSN 550, and OptiX RTN 900) to meet the requirement for bearing IP services.
- Can be flexibly networked with WDM equipment and Metro equipment.
- Can transparently transmit services over third-party Layer 2 networks, allowing end-to-end configuration and management.
Indicator and Specifications | Description | |
---|---|---|
Dimensions (H x W x D) | OptiX OSN 1500A: 131 mm x 444 mm x 262 mm OptiX OSN 1500B: 221 mm x 444 mm x 263 mm |
|
Number of valid slots | OptiX OSN 1500A: 10 (slots 2-9 and slots 12-13) for processing boards OptiX OSN 1500B: 12 (slots 1-9 and slots 11-13) for processing boards and 4 for interface boards |
|
Equipment capacity | Packet | 8 Gbit/s |
TDM | 60 Gbit/s higher order cross-connections and 20 Gbit/s lower order cross-connections | |
Service type supported | SDH, PDH, ATM, CES, Ethernet, PCM, SAN, video and others | |
Network topology | Point-to-point, chain, star, ring, ring with chain, intersecting rings, tangent rings | |
Backup and protection | Network-level protection (packet) | Tunnel 1:1/1+1 APS, PW 1:1/1+1 APS, LPT |
Network-level protection (TDM) | SDH protection: subnet connection protection, linear MSP, ring MSP, DNI protection, E1 SNCP, shared-fiber virtual path protection, optical-path-shared MSP | |
EoS protection: LCAS, LPT, STP/RSTP, MSTP, RPR, VP-Ring/VC-Ring protection | ||
Device-level protection | Packet LAG TDM: TPS, BPS, PPS, LAG, DLAG 1+1 hot backup for system control, switching, and timing units 1+1 hot backup for power input units 1:N protection for +3.3 V power supply of the board Intelligent fan Board protection modes under abnormal conditions |
|
Maintenance | MPLS OAM | CV, FFD, BDI, FDI, Ping, Traceroute |
ETH OAM (packet) | Ethernet service OAM: CC, LB, LT, LM (only single-ended LM), DM (only two-way DM) Ethernet port OAM: OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection |
|
ETH OAM (TDM) | Ethernet service OAM: CC, LB, LT, OAM_Ping Ethernet port OAM: OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection |
|
Synchronization | Packet | Physical-layer clock Synchronous Ethernet CES ACR |
TDM | Physical-layer clock | |
DCN | Outband DCN | HWECC, IP over DCC, OSI over DCC |
Inband DCN | HWECC, IP | |
Standard working voltage | If the standard voltage of the input power is -48 V, the power voltage ranges from -38.4 V to -57.6 V. If the standard voltage of the input power is -60 V, the power voltage ranges from -48 V to -72 V. |
|
Installation method | ETSI cabinet, 19-inch cabinet, wall, desk | |
Equipment running environment | Subrack temperature | Long-time operation: 0ºC to 45ºC Short-time operation: -5ºC to +55ºC |
Subrack humidity (relatively) | Long-time operation: 5-85% Short-time operation: 5-95% |
|
Reliability specifications | System availability | 0.999997671 |
Mean time to resolution (MTTR) | 1 h | |
Mean time between failures (MTBF) | 49.02 years |
Model:OSN 1500A
Detail: The OptiX OSN 1500A subrack has only one layer structure. The subrack consists of a board area, an auxiliary interface board area, a power interface board area, a fan area, and a cable routing area.
Condition: Brand New Sealed
Availability: IN STOCK