Huawei MA5616 DSLAM MSAN

$2,400.00 $1,000.00

Brand: Huawei

Model: MA5616

Detail: Huawei SmartAX MA5616 Multi-service Access Module

Condition: 100% New

Availability: IN STOCK

  • Description
  • Features
  • Ordering information
  • Inquiry

The SmartAX MA5616 Multi-service Access Module (MA5616 for short) is a 2-U high and 19-inch wide board-inserted device. It provides four service slots for flexible board configurations.

The MA5616 applies in fiber to the building (FTTB) and fiber to the curb (FTTC) scenarios. It can also function as a mini-digital subscriber line access multiplexer (DSLAM) or multiservice access node (MSAN). The MA5616 can be installed in corridors or cabinets (indoor or outdoor).

Each MA5616 provides user-to-network interfaces (UNIs), such as ADSL2+, VDSL2, SHDSL, POTS, FE, ISDN, or combo ports, and network-to-network interfaces (NNIs) that support XG-PON, GPON and GE.

MA5616  (CCUD / CCUE / CCUB / CCUC + PDIA / PAIA / PAIB )

Similar products:MA5818  UA5000  MA5600   MA5603   C&C08

 

Product Display

The following figure shows the appearance of the MA5616 equipped with a CCUE control board and PAIC power board.

Commissioning serial port/Environment monitoring port CON/ESC For the CON port: supports local and remote maintenance, which allows users to configure the MA5616 using software, such as HyperTerminal, through CLI. The default baud rate is 9600 bit/s.For the ESC port: connects to an environment monitoring unit (EMU), which sends monitored environment monitoring parameters to the MA5616.
Uplink optical port 0, 1 Supports autonegotiation among XG-PON, GPON, EPON, and GE. Provides XG-PON,GPON, EPON, and GE upstream transmission or GE cascading. When this uplink optical port 0 is used as a GE port, it can be an alternative to the GE electrical (RJ45) port.
Maintenance network port ETH A 100M Base-T commissioning network port, which is a front-access-cabled FE port and supports 100 Mbit/s full-duplex in autonegotiation mode.
Clock port CLK/TOD Outputs 2 MHz clock pulse signals.
Environment parameter monitoring port ALARM Can be connected to a sensor to monitor environment parameters.

Product Highlights

High-Speed Vectoring
The MA5616 supports vectoring, which is used to increase VDSL2 line rates. With this technology, users can access the Internet at a higher rate and experience more and better VDSL2 services.Crosstalk cancellation in the downstream direction

Crosstalk cancellation in the upstream direction

IPv6
Combo Board Design
Comprehensive QoS
High Efficiency Maintenance and Management

Specifications

Device Parameters
Weight(chassis in full configuration) ≤10.0 kg
Dimensions (height x width x depth) 88.1 mm x 442 mm x 245 mm (without mounting ears)
88.1 mm x 482.6 mm x 245 mm (with mounting ears)

 

Power Parameters
Power Supply Mode Operating Voltage Maximum Input Current
DC power supply -38.4 V DC to -72 V DC 14 A
AC power supply 90 V AC to 264 V AC 6 A
AC power supply + battery backup AC power supply: -90 V AC to 264 V AC

Batteries: -43.2 V DC to -52 V DC

AC power supply: 3 ABatteries: 5 A

 

 

Operating Environment
Ambient Temperature Ambient Humidity Atmospheric Pressure Altitude
-40 °C to +65 °C* 5% RH to 95% RH 70 kPa to 106 kPa < 4000 m**
*The MA5616 can start up at the lowest temperature of -25 °C and is functional at the lowest temperature of -40 °C.**The air density varies with the altitude, which affects the heat dissipation of a device. Therefore, the ambient temperature of the MA5616 varies with the altitude.

Usage Scenario

The following figure shows the position of the MA5616 on a typical network.

Model: MA5616

Detail: Huawei SmartAX MA5616 Multi-service Access Module

Availability:  IN STOCK

Contact Us