PAU 6000

Bränd: Fiberhome

Mudel: PAU 6000

Detail: Fiberhome PAU 6000 Aktiivlaine jagunemine C-RAN-i põhjal .

Seisund: Uus & Kasutatud

Saadavus: LAOS

  • Kirjeldus
  • Funktsioonid
  • Tellimisteave
  • Päring

The PAU 6000 is an active wavelength division transmission based on C-RAN for small multi-service access. The product is located on the access edge layer transmission device of the preamble network.
The PAU 6000 system is mainly used for efficient bearer of CPRI services between BBUs and RRUs. It supports network management and protection functions and is compatible with base station equipment of all manufacturers. Based on Active WDM design, PAU 6000 combines the advantages of Passive WDM and OTN solutions. It has the characteristics of large bandwidth, low latency/jitter, configuration-free, ja lihtne hooldus. It can effectively solve the pressure of optical fiber resources and significantly reduce the construction and maintenance of “mobile pre-transmission”. cost.
The PAU 6000 system uses the same design standards as the RRU and is suitable for outdoor harsh environments.

PAU 6000

Alice kaart

 

 

Large bandwidth, low latency/jitter, kõrge integreeritus
The height of the indoor sub-frame is only 1.5u (1u = 44 mm), koos 2 pilud, which can be plugged into 2 indoor discs;
A single management unit supports up to four 12-wave rings or two 24-wave rings, or eight linear networks;
Single DWDM ring transmission capacity is 12X10G or 24X10G
Supports service types such as GE/10GE/CPRI option2~8;
Support L1&L2 layer network evolution;

Easy to install and easy to maintain
Support automatic discovery of the entire network topology;
Free configuration, fast installation on the RRU side;
Support remote opening/debugging/upgrading;
Support loopback, optical power management, jne.
Compatible with RRU outdoor pole mounting or wall mounting

Ohutu ja usaldusväärne, strong compatibility
Adopting the same design standard of RRU, it is suitable for outdoor harsh environment;
Support wavelength protection, service protection switching time <50Prl
EMC complies with Class B standards and has no impact on wireless devices;
Compatible with BBUs and RRUs of various manufacturers;

Ultra low power design
10G ring full power consumption is less than 200W;
The outdoor 3-way unit is fully equipped with power consumption less than 25W;

Mudel: PAU 6000

Detail: Fiberhome PAU 6000 Aktiivlaine jagunemine C-RAN-i põhjal .

Seisund: Uus & Kasutatud

Saadavus: LAOS

 

Võta meiega ühendust