Huawei OSN 3500 II
Mærke: Huawei
Model:OptiX OSN 3500 II
Detalje:OptiX OSN 3500 II understøttede tjenester SDH, PDH, Ethernet, RPR, ATM og DDN.
Tilstand: Helt ny forseglet
Tilgængelighed: PÅ LAGER
- Beskrivelse
- Specifikation
- Ordreinformation
- Forespørgsel
OptiX OSN 3500 II transmits voice and data services on the same platform with high efficiency. It integrates the following technologies:
- Synkront digitalt hierarki (ALLEREDE)
- Plesiochronous digital hierarchy (PDH)
- Ethernet
- Resilient packet ring (RPR)
- Asynchronous transfer mode (Hæveautomat)
- Wavelength division multiplexing (WDM)
- Digital data network (DDN)
- Automatically switched optical network (EN SØN)
- Microwave Technology
OptiX OSN 3500 II is mainly used at the convergence layer and the backbone layer of the metropolitan area network (MAND). OptiX OSN 3500 II can also be networked with the following equipment to optimize the investment for customers:
- OptiX OSN 9500
- OptiX OSN 7500
- OptiX OSN 3500
- OptiX OSN 2500
- OptiX OSN 2500 REG
- OptiX OSN 1500
- Huawei RTN 2500+(Metro 3000)
- OptiX 155/622H(Metro 1000)
Boards that support the REG function
Bestyrelse | Slot (60 Gbit/s Cross-Connect Capacity) | Slot (110 Gbit/s Cross-Connect Capacity) | Beskrivelse |
---|---|---|---|
N1SL64 | Ikke understøttet | Slots 7-8 og 11-12 | Med REG-funktionen aktiveret, the board is in RS loopback mode and processes only the regeneration section overhead and the frame header. |
N2SL16, N3SL16 | Slots 2-8 og 11-16 | Slots 2-8 og 11-16 | Med REG-funktionen aktiveret, the board is in RS loopback mode and processes only the regeneration section overhead and the frame header. |
N2SL16A | Slots 2-8 og 11-16 | Slots 2-8 og 11-16 | Med REG-funktionen aktiveret, the board is in RS loopback mode and processes only the regeneration section overhead and the frame header. |
N1SF64, N1SF64A | Ikke understøttet | Slots 7-8 og 11-12 | Med REG-funktionen aktiveret, the board is in RS loopback mode and only processes the regeneration section overhead, the frame header, and FEC overhead. |
Functions and features of the EFS0 :
Funktion og egenskab | EFS0 |
---|---|
Grundlæggende funktioner | Processes 8xFE services and supports the convergence of 60x10 Mbit/s or 6x100 Mbit/s services. |
Functions when being used with the interface board |
|
Specifikationer for den optiske grænseflade |
|
Format of service frames |
|
Maximum uplink bandwidth |
|
Bound bandwidth | N1EFS0: 12xVC-3, or 63xVC-12 + 9xVC-3
N2EFS0/N4EFS0/N5EFS0: 24xVC-3, or 126xVC-12 + 18xVC-3 |
VCTRUNKs |
The number of supported VCTRUNKs is as follows:
Configuration principles are as follows:
|
Mapping granularities | Supports VC-12, VC-3, VC-12-Xv (X≤63), and VC-3-Xv (X≤12) granularities. |
Encapsulation format | Supports the GFP-F encapsulation. |
EPL services | Supports the PORT-based transparent transmission. |
EVPL services | Supports PORT+VLAN-based EVPL services that use the frame encapsulation formats of MartinioE and stack VLAN. |
EPLAN services |
|
EVPLAN services |
|
MTU |
|
MPLS | Supports the MPLS. |
VLAN | Supports 4k VLANs. The VLAN technology complies with IEEE 802.1q/p. |
Rapid spanning tree protocol (RSTP) | Supports the broadcast packet suppression function and RSTP that comply with IEEE 802.1w. |
Link aggregation function | The N1EFS0 does not support the link aggregation function. The N2EFS0, N4EFS0, and N5EFS0 support manual link aggregation. |
IGMP snoking) | Supports the IGMP snooping function. |
ETH-OAM function |
|
QoS function |
|
LCAS-funktion | Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042. |
LPT function |
|
Flow control function | Supports the port-based flow control function that complies with IEEE 802.3x. |
High-precision time (IEEE 1588 V2) | Does not support the high-precision time. |
Test frames |
|
Loopback function |
|
Beskyttelsesordninger | Supports the following protection schemes at the Ethernet equipment level and network level: |
Ethernet performance monitoring | Supports Ethernet performance monitoring at the port level. |
Alarmer og præstationsbegivenheder | Rapporterer forskellige alarmer og præstationsbegivenheder, which facilitates the management and maintenance of the equipment. |
Model:OSN 3500 II
Detalje: OptiX OSN 3500 II understøttede tjenester SDH, PDH, Ethernet, RPR, ATM og DDN.
Tilstand: Helt ny forseglet
Tilgængelighed: PÅ LAGER