OptiX BWS 1600G | Хонгтелеком

Huawei BWS 1600G

Марка: Huawei

Модел: OptiX BWS 1600G

Подробности:Капацитетът на OptiX BWS 1600G за предаване на системата тип I може да бъде надграден до 1600 Gbit/s чрез добавяне на модули на 400 Капацитет Gbit/s. В модул на 400 Gbit.

Състояние: Чисто нов запечатан

Наличност: В НАЛИЧНОСТ

Категория: Huawei DWDM OTN Етикети: Хонгтелеком, OptiX BWS 1600G price, OptiX BWS 1600G, OptiX BWS1600G, OptiX BWS1600G цена, huawei BWS1600G, BWS1600G, huawei BWS 1600G, BWS 1600G

Описание
Спецификация
Информация за поръчка
Разследване

An OptiX BWS 1600G system adopts an ETSI300-119-3 standard cabinet. Следователно, the system is rational in cabinet structure and graceful in appearance.

The main frame of the cabinet is a rack with a door fixed at the front, a rear door with air vents fixed at the back and movable side doors at both sides. The power box is mounted at the top. The DCM frame and the HUB frame are installed at the bottom of the cabinet. The subracks are installed in the middle of the cabinet.

The cabinet features the following:

The cabinet has a front door. Besides, each subrack is equipped with a door that provides a good shelter for the subrack.
The cabinet leaves much space for routing and managing optical fibers and cables.
Two movable side doors are installed at both sides of the cabinet. Each side door can move in or move out along a slide rail on the top and the bottom of the cabinet.
Air vents are provided at the front door of the subrack, the rear door and upper enclosure frame of the cabinet to ensure heat dissipation.

Technical specifications of the cabinet
Вещ	2-m High Cabinet	2.2-m High Cabinet	2.6-m High Cabinet
Размери (Височина x Ширина x Дълбочина)	2000 mm х 600 mm х 300 mm (78.8 в. х 23.6 в. х 11.8 в)	2200 mm х 600 mm х 300 mm (86.6 в. х 23.6 в. х 11.8 в)	2600 mm х 600 mm х 300 mm (102.3 в. х 23.6 в. х 11.8 в)
Тегло (Includes the empty cabinet and power box.)	56 килограма (123 lb.)	60 килограма (132 lb.)	67 килограма (148 lb.)
Максимална консумация на енергия	1300 W	2000 W	2000 W
Nominal working voltage	-48 V DC/-60 V DC	-48 V DC/-60 V DC	-48 V DC/-60 V DC
Диапазон на работното напрежение	-38.4 V до -57.6 V DC/-48 V to -72 V DC	-38.4 V до -57.6 V DC/-48 V to -72 V DC	-38.4 V до -57.6 V DC/-48 V to -72 V DC

Description of the interfaces in the interface area enhanced subrack
Интерфейс		Конектор	Функция
ETHERNET1^а		RJ-45	Serves as the Telecom management network (TMN) interface and local NE management interface. It connects to the ETHERNET2 interface on another subrack through cross-over network cables, to achieve the inter-subrack communication concatenation.
ETHERNET2^а		RJ-45	Serves as the communication interface with the ROP board in the remote optical pumping amplifier (ROPA) система. When the WMU is configured for centralized wavelength monitoring, ETHERNET2 can be used as a backup network interface for inter-subrack communication. It connects to the ETHERNET1 interface on another subrack through cross-over network cables, to achieve the inter-subrack communication concatenation.
PHONE1/PHONE2/PHONE3		RJ-45	Serves as the orderwire phone interface that uses the optical supervisory channel (OSC) and electrical supervisory channel (ESC). Осигурява a 64 kbit/s orderwire voice channel for direct orderwire communication between terminals.
CLOCK	IN1–IN2	SMB	Serve as two clock input 75-ohm interfaces to access 2048 kbit/s or 2048 kHz clock signals from the equipment at the local station.
CLOCK	OUT1–OUT4	SMB	Serve as four clock output 75-ohm interfaces to output 2048 kbit/s or 2048 kHz clock signals to the equipment at the local station.
OCU CLKIN		SMB	Serve as two external clock source interfaces for the board in the system of the early version.
Е&f		DB9	Possesses all the features of RS-232 interface. Serves only as an interface for software internal testing.
Serial 1		DB9	Uses the F2 byte of the supervisory channel and possesses the features of both RS-232 and RS-422 interfaces. The maximum rate is 19.2 kbit / s.
Serial2		DB9	Uses the F3 byte of the supervisory channel and possesses the features of both RS-232 and RS-422 interfaces. The maximum rate is 19.2 kbit / s.
ALM		DB9	Serves for subrack alarm output. The ALM communicates with the PMU board located in the power box. The ALM is connected with the subrack communication interface (SERIAL) on the power box panel.
F1		DB9	Serves as a 64 kbit/s co-directional data interface.
OAM^а		DB9	Serves as a local NE management interface. Operation, administration and maintenance interface.
МОЩНОСТ		DB3	Serves as a subrack power supply interface.
а: Authentication is required before this port is connected. За да бъдем конкретни, you must log in to the NE using the NE administrator account for authentication.