Фиберхоме ИБАС 110А

СТМ-1/4 мулти-сервис платформа за испоруку ИБАС 110А

IBAS 110A is an optical fiber transmission equipment developed by the flames. The device is based on SDH transmission platform, providing 155Mbit / s service, 2M TDM service and Ethernet service, MSTP equipment suitable for the edge of the access layer transmission network

• 2У високо, compact structure, може се монтирати на зид, може се уградити и орман
• Систем обезбеђује 16 × 16 ВЦ4 пуна унакрсна способност

Савршена вишесервисна обрада, providing 155M / ФЕ / 45М. / 34М. / Е1 интерфејс, supporting Ethernet services transparent / Слој 2 пребацивање, виртуелна конкатенација, ЛЦАС, ВЛАН, КинК и друге функције

Line interface and access capacity

It supports standard STM-1/STM-4 optical interface, frame structure and basic functions.

It supports 2 СТМ-1 оптички интерфејси. Equipment can be upgraded to STM-4 through using STM-4 system cards which support 2 СТМ-4 optical interfaces.

The total access capability of this equipment is 64 channels of E1, among which 32 channels of E1 are provided by system card.

Its total Ethernet (10/100Мбит / с） access capability is 16, with system cards (only S622E8 and S155E8 system cards) подржавајући 8.

The total access capability of STM-1 optical tributary of this equipment is 2 and PDH optical tributary access capability is 4.

Кориснички интерфејс

It supports all defined overhead bytes. E1 byte is used for providing one channel of order wire; E2 and F1 bytes are used for providing four channels of data interfaces with rate < 9.6кбит/с. Supports RS232 интерфејс.

Various management interfaces

Provides F and f （f/Debug）интерфејси. The F interface is connected with network management server, which uses standard Ethernet communication protocols and processes management information from server. The f interface is connected with PC and uses RS232 интерфејс. When management network is not established, и equipment needs maintenance, f interface can also be used for equipment debugging and maintenance. Истовремено, један

Equipment Overview

channel of RS485 interface is provided for management for other access equipments of FiberHome. For application in transferring the networking management through equipments of other manufacturers, F2 channel can be used as DCC channel for transferring network management information.

Clock interfaces

IBAS110A equipment provides 2 ports of 2Mbit/s（supporting SSM Резервише хардвер спреман за МИМО функцију）or 2MHz external clock interfaces. Adaptation of 2Mbit/s, 2MHz is performed with setting inside system card. 9-pin D type connector is used as the physical interface.

The timing system of this equipment can work under one of the following three conditions: locking up mode, hold-over mode, free running mode. The equipment reference timing source can be selected from external clock reference input, line reference input and tributary reference input (including STM-1 tributary and E1 tributary).

Networking ability of various topologies

It can support multiple network topologies, such as ring, ланац, T-type (at most supporting 2 optical tributaries or 4 PDH optical tributaries). It can also act as remote end of other equipments ,i.e. услуга extension of high level equipment.

Protection mechanism

When configured as STM-1 equipment, it can provide path protection.

When configured as STM-4 equipment, this equipment is able to provide path protection, line protection and 2-fiber multiplex section заштите.

Alarm function

Provides integrated alarm and report functions of SDH, ПДХ, IBAS110A MSTP Equipment Ethernet, итд.

Обрађује ЕоСДХ услуге 6 ports of circumstance monitor interfaces（TTL level） и 6 ports of control interfaces（TTL level）.

Provides temperature, power alarm and performance monitor функције.

Provides fan alarm functions and fan card can be removed out under electricity-on conditions.

Модел: ИБАС 110А

Детаљ: СТМ-1/4 мулти-сервис платформа за испоруку ИБАС 110А

Стање: Нова & Користи се

Доступност: НА ЛАГЕРУ