• Descriere
  • Caracteristici
  • Informatii despre comanda
  • Anchetă
Maparea versiunii

lists the mapping between the S5720S-28P-PWR-LI-AC chassis and software versions.

Maparea versiunilor
Serie Model Versiune software
S5720S-LI S5720S-28P-PWR-LI-AC

V200R010C00 and later versions

Produse similare:

S5720S-LI

S5720S-12TP-LI-AC
S5720S-12TP-PWR-LI-AC
S5720S-28TP-PWR-LI-ACL
S5720S-28P-LI-AC
S5720S-28P-PWR-LI-AC
S5720S-52P-LI-AC
S5720S-52P-PWR-LI-AC
S5720S-28X-LI-AC
S5720S-28X-LI-24S-AC
S5720S-28X-PWR-LI-AC
S5720S-52X-LI-AC
S5720S-52X-PWR-LI-AC

 

Aspect și structură
S5720S-28P-PWR-LI-AC aspect

1 Twenty-four PoE+ 10/100/1000BASE-T ports 2 Four 1000BASE-X ports

Applicable modules:

  • Modul optic GE
  • Modul optic GE-CWDM
  • Modul optic GE-DWDM
  • Modul de cupru GE (works at 10 Mbit / s, 100 Mbit / s, sau 1000 Mbit / s)
  • Stack optical module (only used for stack connection)
  • 1 m, 3 m, 5 m, și 10 m Cabluri de cupru SFP+ de mare viteză (only used for stack connection)
  • 3 m și 10 m AOC cables (only used for stack connection)
  • 0.5 m și 1.5 m Cabluri de cupru SFP+ dedicate (utilizat pentru stivuirea cu configurație zero, acceptat în V200R011C10 și versiunile ulterioare)
3 One PNP button

NOTĂ:

This button presently serves no function. It is reserved for future use.
4 Un port de consolă
5 Șurub de împământare

NOTĂ:

Se folosește cu un cablu de împământare.
6 Jack for AC power cable locking strap

NOTĂ:

The AC power cable locking strap is not delivered with the switch.
7 AC socket

NOTĂ:

It is used with an AC power cable.

- -
Descrierea portului

10/100/1000BASE-T port

A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit / s, and must use an Ethernet cable. describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.

Masa 2 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Atribut Descriere
Tip conector RJ45
Conformitatea standardelor IEEE802.3, IEEE802.3u, IEEE802.3ab
Mod de lucru 10/100/1000 Auto-detecție Mbit/s
Distanța maximă de transmisie 100 m

1000BASE-X port

When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X port uses a GE copper module, it can transmit and receive data at 10 Mbit / s, 100 Mbit / s, sau 1000 Mbit / s. describes the attributes of a 1000BASE-X Ethernet optical port.

Masa 3 Attributes of a 1000BASE-X Ethernet optical port
Atribut Descriere
Tip conector LC/PC
Atributele portului optic Depend on the module used
Conformitatea standardelor IEEE802.3z

Port de consolă

Portul de consolă este conectat la o consolă pentru configurarea la fața locului. Portul trebuie să utilizeze un cablu de consolă. Portul de consolă este utilizat atunci când un comutator este pornit pentru prima dată. Pentru detalii despre atributele unui port de consolă

Masa 4 Atributele unui port de consolă
Atribut Descriere
Tip conector RJ45
Conformitatea standardelor RS-232
Mod de lucru Receptor/emițător asincron universal duplex (UART)
Rata baud 9600 biți/s, 19200 biți/s, 38400 biți/s, 57600 biți/s, sau 115200 biți/s

Valoare implicită: 9600 biți/s

Descrierea indicatorului

The S5720S-28P-PWR-LI-AC has similar indicators to those of the S5720-28X-PWR-LI-AC, except that the S5720S-28P-PWR-LI-AC does not have an RPS or USB indicator.

Configurarea sursei de alimentare

The S5720S-28P-PWR-LI-AC has a built-in power module and does not support pluggable power modules. The built-in power module can provide 370 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 12 ports in compliance with 802.3at. The switch cannot connect to an RPS power supply.

shows the power supply mode of a built-in AC PoE power module (PWR). The PWR module receives AC power from an external power source and provides two outputs: 12 V and -53 V. The 12 V output is provided for the chassis, si -53 V output is provided for PDs.

Figura 2 Power supply by a built-in AC PoE power module

L: live wire N: neutral wire PGND: protection ground GND: 12 V masă de referință RTN: -53 V masă de referință
Disiparea căldurii

The S5720S-28P-PWR-LI-AC has two built-in fans for forced air cooling. The airflow direction is left-to-right.

Această figură arată doar direcția fluxului de aer și nu prezintă dispozitivul real.
Specificatii tehnice

lists technical specifications of the S5720S-28P-PWR-LI-AC.

Articol Descriere
Masa 5 Specificatii tehnice
Articol Descriere
Memorie (Berbec) 512 MB
Flash 240 MB
Timpul mediu dintre eșecuri (MTBF) 41 ani
Timp mediu pentru reparații (MTTR) 2 ore
Disponibilitate > 0.99999
Protecție la supratensiune în portul de service Mod comun: ±7 kV
Protecție împotriva supratensiunii de alimentare ±6 kV în regim diferenţial, ±6 kV în modul comun
Dimensiuni (L x D x Î) 442.0 mm x 310.0 mm x 43.6 mm (17.4 în. X 12.2 în. X 1.72 în.)
Greutate (inclusiv materialele de ambalare) 5.2 kg (11.45 livre)
Stiva porturi Twenty-four 10/100/1000BASE-T ports and four 1000BASE-X ports
RTC Nu sunt acceptate
RPS Nu sunt acceptate
PoE Sprijinit
Gama de tensiune nominală 100 V AC to 240 V AC, 50/60 Hz
Domeniul maxim de tensiune 90 V AC to 264 V AC, 47 Hz este 63 Hz
Consum maxim de energie (100% debitului, viteza maximă a ventilatoarelor)
  • Not providing the PoE function: 40.4 W
  • 100% PoE loads: 446.7 W (system power consumption: 77.1 W, PoE: 369.6 W)
Consum tipic de energie (30% a încărcăturii de trafic)

  • Tested according to ATIS standard
  • EEE enabled
  • No PoE power consumption
26 W
Temperatura de Operare
0°C până la 45°C (32°F până la 113 °F) la o altitudine de 0-1800 m (0-5906 ft.)

NOTĂ:

Când altitudinea este 1800-5000 m (5906-16404 ft.), cea mai ridicată temperatură de funcționare se reduce cu 1°C (1.8° F) de fiecare dată când altitudinea crește cu 220 m (722 ft.).

Temperatura de funcționare pe termen scurt -5° C până la + 55 ° C (23°F to 131°F) la o altitudine de 0-1800 m (0-5906 ft.)

NOTĂ:

Când altitudinea este 1800-5000 m (5906-16404 ft.), cea mai ridicată temperatură de funcționare se reduce cu 1°C (1.8° F) de fiecare dată când altitudinea crește cu 220 m (722 ft.).

The equipment can operate beyond the normal operating temperature range for a short-term period, but the following conditions must be met:

  • The equipment operates at a temperature of over 45°C (113° F) consecutively for at most 96 hours in one year.
  • The equipment operates at a temperature of over 45°C (113° F) for a total of no more than 360 hours in one year.
  • The equipment operates at a temperature of over 45°C (113° F) for no more in 15 times in one year.

The equipment may be damaged or experience unexpected exceptions if any of the preceding limits is exceeded.

The equipment cannot start when the temperature is lower than 0°C (32° F). The maximum distance of optical modules used in these conditions cannot exceed 10 km.

Temperatura de depozitare -40°C până la +70°C (-40°F până la +158 °F)
Zgomot la temperaturi normale (27° C, puterea sonoră) less than 49.1 dBA
Umiditate relativă 5% la 95%, necondensabil
Altitudine de operare 0-5000 m (0-16404 ft.)
Certificare

  • Certificare EMC
  • Certificare de siguranță
  • Certificare de fabricație
Numărul piesei 98010589

 

Model: S5720S-28P-PWR-LI-AC

Detaliu: Huawei Switch S5720S-28P-PWR-LI-AC

Disponibilitate: ÎN STOC

Contactează-ne