S5700-28C-SI-AC

$700.00

Brand: Huawei

Model: S5700-28C-SI-AC

Detail: 02354043 Huawei S5700 Series Switch S5700-28C-SI-AC(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,with 1 interface slot,with 150W AC power)

Condition: Brand New Sealed

Availability: IN STOCK

Description
Specification
Ordering information
Inquiry

Overview (S5700-28C-SI-AC)

The S5700-28C-SI-AC is gigabit Layer 3 Ethernet switch based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). With 20 GE ports (10/100/1000Base-T) and 4 GE Combo ports, it provides a large switching capacity, high-density GE interfaces, and 10 GE uplink interfaces for users, applicable to various scenarios. The S5700-28C-SI-AC integrates many advanced technologies in terms of reliability, security, and energy conservation in order to help enterprise customers build a next-generation IT network.

Quick Specs

Figure 1 shows the appearance of Huawei S5700-28C-SI-AC switch.

S5700-28C-SI-AC

Product Code	S5700-28C-SI-AC
Ports	24 × 10/100/1,000 Base-T ports
Extended Slots	2 extended slots, one for an uplink subcard and the other for a stack card.
Memory (RAM)	256 MB
Flash	32 MB
MAC Address Table Size	16 MAC
Subcard Supported	4 x 1,000 Base-X SFP subcard 2 x 10 GE SFP+ subcard 4 x 10 GE SFP+ subcard
Voltage Required	AC: Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz DC: Rated voltage range: –48V to –60V Maximum voltage range: –36V to –72V
Power Device	Double hot-swappable AC/DC power supplies
Power Consumption Operational	< 56 W
Forwarding performance	96 Mpps
Switching capacity	256 Gbit/s
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm
Package Weight	7.2 kg
PoE	Not supported

Product Details

Figure 2 shows the front panel of Huawei S5700-28C-SI-AC switch.

S5700-28C-SI-AC_front

Note:

①	Twenty 10/100/1000BASE-T ports	②	Front card slot
③	USB port	④	ETH management port
⑤	One console port	⑥	Four combo ports

* The front card slot is equipped with the card module, but the card module should be purchased separately.

*Before installing or maintaining a switch, wear an ESD wrist strap and insert the other end of the ESD wrist strap into this ESD jack.

Figure 3 shows the back panel of Huawei S5700-28C-SI-AC.

S5700-28C-SI-AC_back

Note:

①	ESD jack	②	Rear card slot
③	Fan slot	④	Power module slot 2
⑤	Power module slot 1

*Ventilating fan, cards and power modules have been installed in the diagram, but they should be purchased alone.

*Before installing or maintaining a switch, wear an ESD wrist strap and insert the other end of the ESD wrist strap into this ESD jack.

Recommended Modules

Table 2 shows the recommended modules.

	Model	Description
Power Module	LS5M100PWA00	150W AC Power Module(Gray)
Power Module	LS5M100PWD00	150W DC Power Module(Gray)
Optical Transceivers	OMXD30000	Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC)
	OSX010000	Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC)
	SFP-10G-USR	10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC)
	eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.5km,LC)
	eSFP-GE-ZX100-SM1550	eSFP, GE, Single-mode Module(1550nm,100km,LC)
	SFP-FE-SX-MM1310	Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC)
	eSFP-FE-LX-SM1310	Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC)
	S-SFP-FE-LH40-SM1310	Optical Transceiver, eSFP, FE , Single-mode Module(1310nm,40km,LC)
Copper Transceivers	SFP-1000BaseT	1000BASE-T (RJ45) SFP Electrical Module, Auto Negotiate,100m
Card	ES5D000X2S00	2 10 Gig SFP+ interface card(used in S5700SI and S5700EI series

Compare with Similar Item

Table 3 shows the comparison of Huawei S5700-28C-SI, S5700-28C-SI-AC and S5700-28C-PWR-SI.

Models	S5700-28C-SI	S5700-28C-SI-AC	S5700-28C-PWR-SI
Fixed Ports	24 × 10/100/1,000 Base-T ports, 4 of which are dual-purpose 10/100/1,000 or SFP	24 × 10/100/1,000 Base-T ports, 4 of which are dual-purpose 10/100/1,000 or SFP	24 × 10/100/1,000 Base-T ports, 4 of which are dual-purpose 10/100/1,000 or SFP
Extended Slots	2 extended slots	2 extended slots	2 extended slots
Power Supply	Double hot-swappable AC/DC	Double hot-swappable AC/DC	Double hot-swappable AC , PoE+
Forwarding Performance	96 Mpps	96 Mpps	96 Mpps
Switching Capacity	256 Gbit/s	256 Gbit/s	256 Gbit/s
Power Consumption	< 56W	< 56W	< 836W (PoE: 740W)

Specifications

Item	S5700-26X-SI-12S-AC
Fixed Ports	12 x 10/100/1,000 Base-T, 12 x 100/1,000 Base-X, 2 x 10 GE SFP+
Extended Slots	N/A
MAC Address Table	IEEE 802.1d compliance 16K MAC address entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses
VLAN	4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping
Reliability	RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection
IP Routing	Static route, RIPv1, RIPv2, RIPng, and ECMP
IPv6 Features	Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet 6to4 tunnel, ISATAP tunnel, and manually configured tunnel
Multicast	IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs MLD v1/v2 snooping Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics
QoS/ACL	Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports
Security	User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC Blackhole MAC address entries Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist 802.1x authentication, MAC address authentication, and combined authentication on a per port basis Portal authentication on a per VLANIF interface basis
Management and Maintenance	Stacking (not supported by S5700-26X-SI-12S-AC) MAC Forced Forwarding (MFF) Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different levels
Interoperability	Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP)
Operating Environment	Operating temperature: 0°C to 50°C Relative humidity: 5% to 95% (non-condensing)
Input Voltage	AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz Maximum voltage range: 90V to 264V, 50 Hz/60 Hz
Dimensions (W x D x H)	S5700-26X-SI-12S-AC: 442 mm x 310 mm x 43.6 mm
Power Consumption	< 42.3W